Rear Panel Input / Output Connections

14B SST Series Amplifier

Rear Panel Input / Output Connections

Fig 1

1/4” PHONE PLUG

XLR TYPE RCA PLUG

1	4
	3

1. Input Select Switch.

Each SST channel gives the user the option of switching between either balanced input or single ended input.

Input Sensitivity Selection.

The optimum gain setting will depend upon the source pre-amp operating level, and or personal preference.

The UNBAL setting is used when the source is single-ended, or from a transformer coupled balanced source. The BAL+6 setting is used when the source output is actively balanced.

The UNBAL and BAL+6 setting provides the most amplifier gain -29 dB. (1v in = 100w @ 8 ohms.) (noise -110 dB)

The BALsetting is used when the sources output is actively balanced.

This setting with any systems where the volume control rotation is limited to the bottom half of the control or less.

The BAL setting provides an amplifier gain - 23 dB. ( 2v in = 100w @ 8 ohms.) ( noise -113 dB )

The noise is referenced in dB below rated output. Different input configurations result in slightly different noise readings. The above noise ratings represent minimum readings, actual readings may be better.

2. Balanced Input connector. ( Imp. 20k )

This input connector accepts standard ‘XLR’ or 1/4” TRS .

Use quality, 100% shielded cables with gold plated connectors.

3. Single Ended Input. ( Un-balanced input ) ( Imp. 50k )

This input connector accepts standard ‘RCA’ or ‘Phono’ connectors.

Use quality, 100% shielded cables with gold plated connectors.

Balanced input Vs Single ended input:

The balanced input requires a balanced pre-amp source. Balanced systems provide noise rejection from external electrical interference, so cable length can be very long ( 50m or longer ).

The single ended or unbalanced input is provided for pre-amps without balanced output. Single-ended cables should be kept to 20’ (7m) or less. In general never use longer cables than necessary, never coil excess cable length, and keep signal wires away from AC power or speaker cables.

4. Level Control. (pro models only)

The level control will attenuate the input signal level from 0dB through -14dB.

14B SST specifications

The Bryston 14B SST is a high-performance power amplifier that has garnered acclaim for its engineering excellence and robust sound reproduction. Designed to meet the demands of audiophiles and professional audio applications, the 14B SST stands out with its impressive combination of power, precision, and reliability.

One of the main features of the Bryston 14B SST is its power output. With a staggering 600 watts per channel into 8 ohms and 1000 watts into 4 ohms, the amplifier delivers the muscle required to drive even the most demanding loudspeakers with ease. This level of power not only provides immense dynamic range but also ensures that systems maintain clarity and control at high volumes.

The 14B SST incorporates advanced technologies that elevate its performance. It utilizes a fully complimentary and symmetrical circuit design, which contributes to low distortion and high linearity. This architecture is crucial in achieving a clean and transparent sound, allowing listeners to experience music as it was intended to be heard. The amplifier also features a sophisticated power supply with large toroidal transformers that minimize noise and maximize energy delivery.

Another key characteristic of the Bryston 14B SST is its build quality. Encased in a sturdy chassis with premium components, this amplifier is designed for durability and longevity. The extensive use of heat sinks allows for efficient heat dissipation, ensuring reliable operation even during extended use. The attention to detail in construction not only enhances performance but also gives the amplifier a timeless aesthetic that fits seamlessly into any audio setup.

Bryston's commitment to quality is reflected in the 14B SST's high-quality output transistors, which have been carefully selected for their performance characteristics. The amplifier’s circuitry is optimized for minimal interference and noise, resulting in an engaging listening experience. The 14B SST also features Bryston’s innovative SST technology, which stands for "Squared, Symmetrical, and Time-aligned" - a design philosophy that helps to ensure accurate waveform reproduction.

In addition to its impressive technical specifications, the Bryston 14B SST comes with an extensive warranty, which is a testament to its reliability and Bryston’s confidence in their product. With all these features combined, the Bryston 14B SST presents itself as an ideal choice for audiophiles seeking uncompromised sound quality, power, and durability, making it a standout amplifier in the competitive high-end audio market.