Installation

1.Visually inspect the UPS for freight damage. Report damage to the carrier and your local dealer, Liebert representative or the Liebert Worldwide Support Group.

2.Decide where to place the PowerSure PSP. Install the UPS indoors in a controlled environment, where it cannot be accidentally turned off. Place it in an area of unrestricted airflow around the unit, away from water, flammable liquids, gases, corrosives, and conductive contaminants. Maintain a minimum clearance of 4 inches (100mm) on each side of the UPS. Maintain an ambient temperature range of 32°F to 104°F (0°C to 40°C).

NOTE

UPS operation in temperatures above 77°F (25°C) reduces battery life.

Plug computers, monitors & network hubs into orange receptacles

Plug this type of equipment into black receptacles ONLY

Inkjet	Scanner	Fax
printer		machine

3.Plug the PowerSure PSP’s attached 6-ft. (1.8m) power cord into an AC outlet. Check that the Site Wiring Fault Indicator on the rear is not illuminated. If lit, refer to the Troubleshooting section.

4.Plug any computers and monitors into the orange battery backed up receptacles.

Other office machines that do not exceed the capacity of the UPS— inkjet printers, scanners and fax machines—may be plugged into either of the two (2) black receptacles, which provide surge protec- tion only.

PSP specifications

The Liebert PSP (Power Supply Panel) is a critical component designed to provide reliable power protection and support for various sensitive equipment, especially in environments like data centers and telecommunications. This device is engineered to ensure continuous operations and safeguard against electrical disturbances, making it an essential part of an uninterruptible power supply (UPS) system.

One of the main features of the Liebert PSP is its advanced power conditioning capability. The unit is equipped with technology that filters out electrical noise and voltage spikes. This results in a stable output voltage that protects connected devices from damage due to power anomalies. The device utilizes double-conversion online technology, which continuously converts incoming AC power into DC and then back to AC. This process provides a clean and consistent power supply, ideal for sensitive electronic equipment.

Additionally, the Liebert PSP features built-in battery backup, ensuring that even during power outages, connected devices remain operational. The intelligent battery management system optimizes battery performance and lifespan by managing charge cycles efficiently. The unit can accommodate various battery types, providing flexibility based on user requirements.

The design of the Liebert PSP emphasizes robust thermal management to maintain optimal operating conditions. It offers features like advanced airflow systems and temperature monitoring to prevent overheating, which can lead to equipment failure. Furthermore, it often includes user-friendly interfaces, such as LCD displays or LED indicators, for real-time monitoring of power conditions and status.

In terms of connectivity, the Liebert PSP usually comes with multiple input and output options, allowing seamless integration into existing power infrastructure. It often supports communication protocols that enable remote monitoring and management, enhancing the visibility and control over power resources.

In summary, the Liebert PSP stands out due to its combination of advanced power conditioning, reliable battery backup, effective thermal management, and user-friendly interfaces. Its design caters to the needs of critical applications, ensuring that vital systems remain operational even in the face of power disruptions. With its robust technology and thoughtful engineering, the Liebert PSP is a trusted solution for maintaining power reliability and protecting sensitive equipment in various settings.