Liebert PSP user manual Battery Handling Precautions

Page 7

! CAUTION

BATTERY HANDLING PRECAUTIONS

Servicing of batteries should be performed or supervised by personnel knowledgeable of batteries and required precautions. Keep unauthorized personnel away from the batteries.

A battery can present a risk of electrical shock and high short-circuit current. The following precautions should be observed when working on batteries:

•Remove watches, rings, and other metal objects.

•Use tools with insulated handles.

•Do not dispose battery or batteries in a fire. The battery may explode.

•Do not open or mutilate the battery or batteries. Released electrolyte is harmful to skin and eyes. It may be toxic.

•When replacing the battery, use same number and type of battery as the suitable recommended type of battery listed in specification table in back of this manual.

•Handle, transport and recycle batteries in accordance with local regulations.

NOTE

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment uses, generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the UPS and the receiver.

•Connect the UPS into an outlet on a circuit different from the one on which the receiver is connected.

3

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Power Availability Powersure PSPPage Table of Contents Troubleshooting MaintenanceSpecifications Safety Precautions Important Safety InstructionsPage Battery Handling Precautions Introduction & System Description Front View of UPS DIP Rear View of UPSInverter Transfer SwitchBattery Charger BatteryWHAT’S Included Installation Option 1-Serial Communications Controls and Indicators ON/OFF/Alarm Silence ButtonUtility Indicator Green Status Indicators Fault, Utility, BatteryTransfer Voltage Selectors DIP Switches Site Wiring Fault Indicator RedModes of Operation Normal ModeBattery Mode Communications DB-9 ConnectorData Line Protection Connectors Remote Shutdown Via the DB-9 ConnectorUSB Interface Port Maintaining Batteries Cleaning the UPSBattery Replacement MaintenanceBattery Replacement Procedure Troubleshooting Guide to Status IndicatorsProblem Cause Solution Troubleshooting ChartInput AC Parameters SpecificationsProduct Warranty Registration Battery Run TimesPage PowerSure PSP Mounting Template Page Page Company Behind the Products

PSP specifications

The Liebert PSP (Power Supply Panel) is a critical component designed to provide reliable power protection and support for various sensitive equipment, especially in environments like data centers and telecommunications. This device is engineered to ensure continuous operations and safeguard against electrical disturbances, making it an essential part of an uninterruptible power supply (UPS) system.

One of the main features of the Liebert PSP is its advanced power conditioning capability. The unit is equipped with technology that filters out electrical noise and voltage spikes. This results in a stable output voltage that protects connected devices from damage due to power anomalies. The device utilizes double-conversion online technology, which continuously converts incoming AC power into DC and then back to AC. This process provides a clean and consistent power supply, ideal for sensitive electronic equipment.

Additionally, the Liebert PSP features built-in battery backup, ensuring that even during power outages, connected devices remain operational. The intelligent battery management system optimizes battery performance and lifespan by managing charge cycles efficiently. The unit can accommodate various battery types, providing flexibility based on user requirements.

The design of the Liebert PSP emphasizes robust thermal management to maintain optimal operating conditions. It offers features like advanced airflow systems and temperature monitoring to prevent overheating, which can lead to equipment failure. Furthermore, it often includes user-friendly interfaces, such as LCD displays or LED indicators, for real-time monitoring of power conditions and status.

In terms of connectivity, the Liebert PSP usually comes with multiple input and output options, allowing seamless integration into existing power infrastructure. It often supports communication protocols that enable remote monitoring and management, enhancing the visibility and control over power resources.

In summary, the Liebert PSP stands out due to its combination of advanced power conditioning, reliable battery backup, effective thermal management, and user-friendly interfaces. Its design caters to the needs of critical applications, ensuring that vital systems remain operational even in the face of power disruptions. With its robust technology and thoughtful engineering, the Liebert PSP is a trusted solution for maintaining power reliability and protecting sensitive equipment in various settings.
Top Page Image Contents