Troubleshooting, Blue | LaCie 119 instruction

6. Troubleshooting

The Problem Power LED not on

No Plug & Play

•Make sure power switch is in ON position.

•Check power cord connections.

•Check if PC system is Plug & Play

•Check if Video Card system is Plug & Play

•Check if D-15 plug pin of video cable is bent

•Make sure monitors drivers are installed.

Fuzzy Picture

Picture bounces of there is a wave pattern

The POWER LED is on but there is no video or picture,

Missing RED, GREEN or

Screen Image not centered

Picture has defects, for example white does not look white.

•Adjust contrast and brightness controls.

•Move electrical devices that may cause interference.

•POWER switch must be ON

•Video card must be snugly fit into position.

•Check cable connection.

•Inspect pins on cable to be sure all are straight.

•Make sure computer is operational by typing the CAPS LOCK key while observing CAPS LOCK LED. The LED should be operational.

Inspect the video cable to be sure none of the pins are bent.

Adjust pixel frequency (CLOCK) and FOCUS or press hot-key (AUTO-key).

Adjust RGB color or select color temperature.