LaCie USB 2.0 user manual Formatting for Windows Users, On next

LaCie Little Disk • Design by Sam Hecht	Formatting and Partitioning
User Manual	page 12

3.1. Formatting for Windows Users

The process of formatting a drive on a computer running Windows 2000 or Windows XP consists of two steps: (1) installing a signature on the drive, and

(2)formatting the drive. These steps will erase anything that is on the disk.

1.Connect the drive to the computer via the interface port.

2.Right-click My Computer and select Manage.

3.From the “Computer Management” window, se- lect Disk Management (located below the Storage group).

4.If the “Initialize and Convert Disk Wizard” window appears, click Cancel.

5.Windows will list the hard drives that are installed on the system. Locate the drive that is represented by the icon. Right-click the icon and select Initialize.

6.In the box to the right that says Unallocated, right- click and select New Partition…

7.On the first page of the “New Partition Wizard,” click Next.

8.Click Next.

9.Click Next.

10.Click Next.

11.Click Next.

■(continued on next page)

CAUTION: Following these steps will erase ev- erything from the hard drive. If you have informa- tion that you want to protect or continue to use, back up this information before performing these steps. If user manuals and utilities are deleted, you can download them from www.lacie.com.

Fig. 3.1.2.A

Fig. 3.1.2.B