LevelOne WPC-0601 user manual Data Site Survey Screen, Wireless Network Sequence order

N_Max Wireless CardBus Adapter

Data - Site Survey Screen

Display PC To PC	Select this check box to display ad-hoc (computer-to-computer)
(Ad-Hoc)	networks.
Display 802.11b	Select this check box to display 802.11b (infrastructure) net-
Access Points	works.
Display 802.11g	Select this check box to display 802.11g (infrastructure) net-
Access Points	works.
Network Name	Available wireless networks are listed.
MAC Address	This is the MAC address of the Access Point (or Wireless sta-
	tion, if the network is an Ad-hoc network).
Security	Data encryption and authentication methods used on the wire-
	less network
WPS	This will indicate "Y" (the Access Point with WPS function), "Y+".
	(the WPS function of the Access Point is in used) or "---" (the
	Access Point without WPS function)
CH.	The channel used by the Wireless network.
Signal	This is displayed as percentage (0 ~ 100%).
Frequency	The Wireless band used by this Wireless network.
Network Type	This will indicate "Infrastructure" (displayed device is an Access
	Point) or "Ad-hoc". (displayed device is a Wireless station)
Status	The area to the left of the "Rescan" button shows the current
	status. In the example above, it shows "Connected".
Rescan	Click this button to rescan for all Wireless networks.

Wireless Network Sequence (order)

You can click the headings (ex. Network Name, MAC Address, Security…) of the Wireless network table to arrange the Wireless network in the desired order.

To Connect to a Wireless Network

∙Double-click on the desired network.

∙Click the name of the wireless network to which you want to connect, and then click Connect.

Note that once you are connected to a Wireless network, the Site Survey screen will identify the current wireless network with a blue icon, as shown below.

10