Installation Instructions

This unit is designed for installation in cars, trucks, and vans with an existing radio opening. In many cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialist shops. Always check the kit application before purchasing to make sure the kit works with your vehicle. If you need a kit but cannot find it available, call our toll-free “HELP” line (1-800-645-4994).

UNIVERSAL INSTALLATION PROCEDURE USING MOUNTING SLEEVE

1.Remove the detachable front panel, if it is attached to the chassis, by pushing the RELEASE button. Slide the mounting sleeve off of the chassis. If it is locked into position, use the removal tools (supplied) to disengage it.

2.Checkthedashboardopeningsizebyslidingthemountingsleeveintoit. Iftheopeningisnotlargeenough,carefully cut or file as necessary until the sleeve easily slides into the opening. Do not force the sleeve into the opening or cause it to bend or bow. Check that there will be sufficient space behind the dashboard for the radio chassis.

3.Locate the series of bend tabs along the top, bottom, and sides of the mounting sleeve. With the sleeve fully inserted into the dashboard opening, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.

4.Place the radio in front of the dashboard opening so that the wiring can be brought through the mounting sleeve. Follow the wiring diagram carefully and make certain all connections of the wiring harness are secure and insulated with wire nuts or electrical tape to insure proper operation of the unit. After completing the wiring connections, attach the front panel and turn the unit on to confirm operation (ignition switch must be “on”). If unit does not operate, re-check all wiring until problem is corrected. Once proper operation is achieved, turn off the ignition switch and proceed with final mounting of the chassis.

5.Carefully slide the radio into the mounting sleeve making sure it is right-side-up until it is fully seated and the spring clips lock it into place.

6.Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and hex nut provided. Bend the strap to position it as necessary.

CAUTION: The rear of the radio must be supported with the strap to prevent damage to the dashboard from the weight of the radio or improper operation due to vibration.

7.Re-attach the front panel to the chassis and test radio operation by referring to the Operating Instructions for theunit.

INSTALLATION USING KITS

1.If your vehicle requires the use of an installation kit to mount this radio, follow the instructions included with the installation kit to attach the radio to the mounting plate supplied with the kit.

2.Wire and test the radio as described in Step 4 above.

3.Install the radio/mounting plate assembly to the sub-dashboard according to the instructions of the installation kit.

4.Attach the support strap to the radio and dashboard as described in Step 6 above.

5.Replace the dashboard trim panel.

ISO INSTALLATION PROCEDURE

This unit has threaded holes in the chassis side panels which may be used with the original factory mounting brackets of some Toyota, Nissan, Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the radio to the dashboard. Please consult with your local car stereo specialist shop for assistance on this type of installation.

1.Remove the existing factory radio from its dashboard or center console mounting. Save all hardware and brackets as they will be used to mount the new radio.

2.Carefully un-snap the plastic frame from the front of the new radio chassis. Remove and discard the frame.

3.Remove the factory mounting brackets and hardware from the existing radio and attach them to the new radio.

CAUTION: DO NOT EXCEED M5 X 8 MM MAXIMUM SCREW SIZE.

LONGER SCREWS MAY TOUCH AND DAMAGE COMPONENTS INSIDE THE CHASSIS.

4.Wire the new radio to the vehicle as per step 4 above.

5.Mount the new radio assembly to the dashboard or center console using the reverse procedure of step 1.

ACD-21 specifications

The Audiovox ACD-21 is a versatile and compact CD player that has captured the attention of music lovers for its unique blend of functionality and portability. Designed for both personal and home use, this device incorporates several key features and technologies that enhance the listening experience.

One of the standout characteristics of the ACD-21 is its sleek and modern design. This CD player is engineered with user convenience in mind, featuring an intuitive interface that allows for easy navigation through playlists. With its lightweight build, the ACD-21 is perfect for those who want to enjoy their favorite tunes on the go, whether at home, in the car, or during outdoor events.

The ACD-21 is equipped with a high-quality audio output, ensuring that sound reproduction is both clear and rich. One of the key technologies integrated into this device is advanced digital signal processing, which enhances audio quality and minimizes distortion. Users can expect crisp highs and deep bass, making every listening session enjoyable.

Another notable feature of the ACD-21 is its compatibility with various formats. While primarily a CD player, it also supports MP3 playback, making it versatile enough to accommodate a wide range of music collections. This feature is particularly beneficial for users who have digitized their music libraries and wish to enjoy them in a physical format.

Moreover, the ACD-21 comes with multiple connectivity options. It includes an auxiliary input, allowing for easy connection to external devices such as smartphones, tablets, or laptops. This capability enables users to play their digital playlists without hassle, making the ACD-21 a flexible addition to any audio setup.

In terms of durability, the Audiovox ACD-21 is built to withstand regular use. The device includes protective features such as shock resistance, ensuring uninterrupted playback even in a portable setting. This durability adds to its appeal, especially for outdoor enthusiasts or those who frequently travel.

In summary, the Audiovox ACD-21 is a feature-rich CD player that stands out for its combination of portability, sound quality, and versatile connectivity. Ideal for various listening settings, it caters to both traditional and modern music formats, ensuring an enjoyable audio experience for all users. Whether for personal enjoyment or sharing music with friends, the ACD-21 is a reliable choice in the world of portable audio devices.