Connecting the Network Cable

Four pair of Cat.5 UTP or STP cable with RJ-45 connector is required for the LevelOne GNC-0101T 64bit 10/100/1000Mbps Gigabit Ethernet Adapter. You can use standard or crossover cable to connect the switch MDI -X or MDI-II port, because the LevelOne GNC-0101T 64bit 10/100/1000Mbps Gigabit Ethernet Adapter will adjust the correct signal automatically.

Software Installation

Before you connect the LevelOne GNC-0101T 64bit 10/100/1000Mbps Gigabit Ethernet Adapter to the network, you have to install the network driver first. The driver for each networking operating system is under a separate directory. A HELP.EXE file under root directory lists the information and detailed installation procedure of all the available drivers.