Lantronix SW 94000 manual Physical Ports, Connectivity, Mode Selection

2: Product Overview

	LED	State		Indication
	10/100TX or 100FX
		Steady		A valid network connection established.
	LNK/ACT			LNK stands for LINK.
	(Green)	Flashing		Transmitting or receiving data.
				ACT stands for ACTIVITY.
100		Steady		Light solid green for a port transferring at 100Mbps.
	(Yellow)	Off	The port is transferring at 10Mbps If this LED is dark.
	10/100/100TX or 1000SX/LX
1000		Steady		Light solid green for a port transferring at 1000Mbps.
	(Green)
		Off	The port is not transferring at 1000Mbps If this LED is dark.
		Flashing		Transmitting or receiving data.
	ACT			ACT stands for ACTIVITY.
	(Yellow)
		Off		Neither transmitting nor receiving data.

Physical Ports

The Xpress-Pro SW 94000 switch provides:

‹Eight 10/100BaseTX ports

‹Eight 10/100BaseTX ports + one 100BaseFX port

‹Six 10/100BaseTX ports + two 100BaseFX ports

‹Four 10/100BaseTX ports + four 100BaseFX ports

‹Eight 10/100BaseTX ports + one 10/100/1000BaseTX port

‹Eight 10/100BaseTX ports + one 1000BaseSX/LX port

Connectivity

‹RJ-45 connectors

‹ST or SC connector on 100BaseFX fiber port.

‹SC connector on 1000BaseSX/LX fiber port.

Mode Selection

‹10BaseT full-duplex mode

‹10BaseT half-duplex mode

‹100BaseTX full-duplex mode

‹100BaseTX half-duplex mode

‹100BaseFX full-duplex mode

‹1000BaseT/SX/LX full-duplex mode

‹Auto-sensing mode

XPress-Pro SW 94000 User Guide 10