Lantronix SW 94000 manual Logging on to the switch, At the screen prompt, Login name, Password

5: Menu-Driven Console Management

The Xpress-Pro SW 94000 switch provides a menu-driven console interface for configuration purposes. The Xpress-Pro SW 94000 switch can be configured either locally through its RS-232 port or remotely via a Telnet session.

This chapter describes how to configure the Xpress-Pro SW 94000 switch using its menu-driven console.

Logging on to the switch

At the screen prompt

Switch Console Login:

Password:

Login name

Enter the console interface factory default console name admin.

Password

Enter the factory default password (no password, press <Enter> directly). Or enter a user-defined password if you followed the instructions later and changed the factory default password.

Factory Default Password: no password, press <Enter> directly.

Note: Only one console and three telnet users can log on to the Xpress-Pro SW 94000 switch concurrently. However, it is not recommended that multiple users modify the configuration at the same time.

XPress-Pro SW 94000 User Guide 27