LevelOne FSW-1600FXT Electronic Emission Notices, Federal Communications Commission FCC Statement

Page 2

Caution

Circuit devices are sensitive to static electricity, which can damage their delicate electronics. Dry weather conditions or walking across a carpeted floor may cause you to acquire a static electrical charge.

To protect your device, always:

Touch the metal chassis of your computer to ground the static electrical charge before you pick up the circuit device.

Pick up the device by holding it on the left and right edges only.

Electronic Emission Notices

Federal Communications Commission (FCC) Statement

This equipment has been tested and found to comply with the limits for a class A computing device pursuant to Subpart J of part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment

European Community (CE) Electromagnetic Compatibility Directive

This equipment has been tested and found to comply with the protection requirements of European Emission Standard EN55022/EN60555-2 and the Generic European Immunity Standard EN50082-1 that calls up the following basic standards:

a)IEC801-2 Electrostatic Discharge b)IEC801-3 RF Immunity

c)IEC801-4 Transient Burst

Image 2
Contents LevelOne Electronic Emission Notices Federal Communications Commission FCC StatementContents Overview ChecklistChapter Introduction Models DescriptionNetwork Parameter for 100Mbps Fiber Chapter Installing & Network ConnectionInstallation Chapter Troubleshooting Cabling ProblemsPort Fiber Switch Technical Specifications Network InterfaceFrequency 50 ∼60 Hz Consumption 43W Max Hub Diagnostic Test Workstation ProblemsOther Problems Switch Hub Cascading and Long-Haul Connection 100Base-TX 100Base-FXLong Haul Intra-hub connection Level 2 8 port Fiber Switch Local Fiber Port Remote Fiber PortPage LED Indicators Color FunctionFront view of 16 Port ST/SC Fiber Switch