Bang & Olufsen HDR 2 manual Record here and now

Page 12

12

Record here and now

>> Record a programme

There are two ways to record a programme here and now. One allows you to watch a source, such as TV, while recording another source, such as STB. The source you want to record must be built into your television (such as TV) or connected directly to it (such as STB). If you start a recording this way, you can watch another source while recording is going on, but not a previous recording. A second way allows you to watch one recording while making another.

If you start a manual recording from the hard disc recorder main menu, you can then watch a second recording at the same time.

Note that you can not start a new recording if there is a recording already in progress, or if the hard disc is full of protected recordings.

V.TUNER is only accessible if you set the REPLAY option in the hard disc recorder SETUP menu to BASIC or EXTENDED. For further information, refer to the chapter ‘Preference settings’ on page 38.

If you start a recording while the hard disc recorder is in standby, recording is delayed by the amount of time it takes for the hard drive to start – up to 35 seconds.

Record a source and watch

 

Make a recording and view a previous

another source at the same

 

recording at the same time …

time …

 

> Press V MEM*, then the green button to bring

Press RECORD twice. The hard

RECORD

up the main menu.

disc recorder begins recording

RECORD

> Press

to highlight a source, such as V.TUNER

the current programme

 

(for TV programmes) or STB (for programmes

 

 

from a set-top box) and press GO to switch it

To watch another source during

DVD

on.

 

recording, just select the desired

 

> Select the program you wish to record. Press

source on Beo4, such as DVD

 

or

to step between programs or use the

 

 

number buttons to select a program directly.

Press V MEM* and then STOP

V MEM

> Press V MEM*, then the green button to bring

twice to stop a recording

STOP

up the main menu once more.

 

STOP

> Press

to highlight RECORD and press GO to

 

 

start the recording. RECORD appears in the

Press to switch the system to

•

display. You can now play a recording stored in

standby.

 

HARD DISC CONTENT.

 

 

> Press V MEM*, then the green button to bring

You can not watch one STB

 

up the main menu.

programme while recording

 

> Press GO to bring up the HARD DISC CONTENT

another.

 

menu.

 

 

 

> Press

or to highlight a previous recording

 

 

and press GO to start playback.

 

 

To stop a recording …

 

 

> Press V MEM*, then the green button to bring

 

 

up the main menu.

 

 

> Press

to highlight STOP RECORDING and

 

 

press GO.

*NOTE! On some Beo4 remote controls, the V MEM button is called V TAPE.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents HDR Page Contents Introducing the hard disc recorder and Beo4 Record programmesSwitch the recorder and the television to standby Playback of a recordingPress twice to start a manual recording Selected source, such as TVStandby indicator ‘Recording in progress’ indicationButton to switch on the hard disc Press to reveal different settingsStore a setting you have made Press V MEM* then the greenPage Daily use Record a programmePlay a recording Edit recordingsTimer recording Program a Timer …Press to highlight Timer Programming Record a programmeCheck the Timers already set To edit a highlighted Timer …To delete a highlighted Timer … Red start and stop times indicate which recordings overlapRecord here and now Timer recording via teletext Find the teletext page you wantPress GO to bring up the Hard Disc Content menu Play a recordingSelect a recording Select a recording …Disc Content menu appears Play and change between recordings …Press to pause playback Playback completely. The HardBrowse through your recordings Play a recordingTo browse through your recordings … Page Edit recordings Protect a recordingTo protect your recordings … Press Exit to leave the menuDelete a recording To delete a recording …About space management and protection Pause and replay an on-going programme Pause a programmeReplay a programme It is not possible to view Teletext during replayCopy from the replay buffer Pause and replay an on-going programmeLimit access to recordings Parental lock Advanced operationUse Groups Use connected video equipment with Beo4Use Groups Place recordings in a GroupTo place a recording in a Group … Place a recording in a Group via the Options menuWhen you have found the desired Group … View recordings in a GroupTo view recordings in a Group … Rename a Group To rename a Group …Move a Group To move a Group …Delete an entire recording To split a recording into two …Trim a recording Split one recording into two at a point of your choiceTrim a recording To trim a recording …Name a recording Copy to an external recorder To copy a recording …To stop copying to the external recorder … Press the yellow button to stop the external copyLimit access to recordings Parental Lock Activate Parental LockSet a Parental Lock code Use connected video equipment with Beo4 Peripheral Unit Controller menuDirect Beo4 operation Use equipment menusUse equipment in a link room While equipment menus are shown …Preference settings Adjust settingsTo adjust settings … What’s on the Setup menu … Set up the hard disc recorder Placement guidelinesWhat to do if the hard disc recorder overheats Connections To connect the hard disc recorder to your television …Set-top box connection To connect a set-top box to the hard disc recorder …Cleaning Set up the hard disc recorderSocket panel ~ mainsTV aerial Menu system at the Basic feature level On-screen menusMenu system at the Advanced feature level Timer Index Setup Feature Level Basic AdvancedWhat’s on the Timer Programming menu … On-screen menusWhat’s on the Edit menu … What’s on the Options menu …Group Default What’s on the Timer Index … What’s on the Feature Level menu …Advanced … The full set of hard disc recorder functions What’s on the Parental Lock Code menu …What’s on the Groups menu … What’s on the Recording Quality menu …What’s on the Recording Duration menu … This setting makes V.TUNER inaccessible! For What’s on the Connections menu …What’s on the Replay menu … Choose between the available languagesWhat’s on the Tuning menu … What’s on the Clock menu …Beo4 remote control ContentMaintenance ClockPlacement PlaybackSet-top box Socket panelPage Page For your information … To contact us, visit our Web-site on …Or write to Bang & Olufsen a/s BeoCare
Top Page Image Contents