Intellinet Network Solutions I-ISS-020 To configure a Windows 95/98 system, Quick Configuration

Page 6

To configure a Windows 95/98 system

1.Right-click Network Neighborhood.

2.Click Properties on the pop-up menu.

3.Click the Configuration tab and select the TCP/IP networking component and click Properties.

4.Make sure “Obtain an IP Address Automatically” is selected.

5.Select the DNS Configuration tab, and select Disable DNS.

6.Select the Gateway tab and remove any addresses. Click OK.

7.Click OK to close the Network Control window.

8.Click OK to close and restart your computer.

To configure other systems

See the documentation for your operating system and set the system up for TCP/IP. Configure the system to be a DHCP client. If the system doesn’t support DHCP, set an IP address that is not conflicted to that system and in the range from 192.168.0.1 to 192.168.0.252.

Configuring the Internet Sharing Station

After you finish setting up and restart your computer, you can open web browser, type the following in the Location (or Address) window, and press Enter.

http://192.168.0.254

You should then see the first screen, which will prompt you for a password. Default password is “admin”, just type admin, then click OK to continue to the configure screen.

Quick Configuration

Simply connect modem to the WAN 1 port of the Internet Sharing Station, and complete all settings on this first page, then restart the Internet Sharing Station, and then restart all of the PCs, you are ready to access Internet.

Basic Configuration

5

Image 6
Contents User’s Manual Features IntroductionPackage Contents Hardware IntroductionDesktop Installation Install the unitConnecting your equipment Magnetic Mounting InstallationConfiguring the Internet Sharing Station To configure other systems To configure a Windows 95/98 systemQuick Configuration Basic ConfigurationAdvanced Configurations Network Configuration Network SettingsModem Configuration Modem AT Command Settings Login Script ConfigurationLogin Script Settings Email Sharing Configuration Remote Access Service ConfigurationVirtual Server Configuration Console Password ConfigurationSetting up the other PCs Firmware Upgrade ProcedureReset to Factory Default System RestartTroubleshooting „ Customizing TCP/IP settingsTo customize TCP/IP settings for your existing network Ipconfig / release Page Specifications Regulatory Standards ComplianceCE Mark Declaration of Conformity for EMC and SafetyEEC Safety ComplianceSicherheitshinweise Script for this scenario Appendix a Login Script Files„ Learn the script syntax Script file used for CompuServeOutlook Express Pc1Pc2 192.168.0.254 Netscape Messenger Fill in the incoming and outgoing mail serverFill in aliases name and real email address Select Edit-Preferences-Mail & Newsgroup-Identity Eudora 1.5.4 ~ Select 192.168.0.254-EditSelect Tools-Options-Getting Started Eudora 4.x.x and above Tools-Options-Sending MailSelect Tools-Options-General