Initial setup

1.Set up your network as shown in the diagram. NOTE: The four LAN connections are examples only.

2.Your LAN PC clients need to be set so that an IP address can be obtained automatically. By default, the router’s DHCP server is enabled so that this doesn’t require any extra steps here. NOTE: Make sure the router’s DHCP server is the only DHCP server available on your LAN. If there is another DHCP on your network, you’ll need to switch one of the DHCP servers off.

3.Once your PC has obtained an IP address from your router, enter the default IP address — 192.168.2.1 (this is the router’s IP

address) — into your PC’s Web browser and press <Enter>.

4.When the login screen displays, fill in the “User name” and “Password” fields, then click “OK” to log in. NOTE: The default username is

“admin”; the password is “1234.” For security