PPPoE

Enter the IP Address, Subnet Mask, Gateway IP Address and DNS IP Address provided to you by your ISP in the appropriate fields.

Click “OK” to finish the Fixed IP xDSL configuration; then you can start using the router.

Select if your ISP requires the PPPoE protocol to connect you to the Internet. Your ISP should provide all information required in this section. User Name — Enter the username provided by your ISP for the PPPoE

connection.

Password — Enter the password provided by your ISP for the PPPoE connection.

Service Name — This is optional. Enter the provided service name if your ISP requires it; otherwise, leave this field blank.

MTU — Enter the MTU value provided by your ISP for the PPPoE connection.

Connection Type — Choose one of three drop-down menu options:

•“Continuous”: Keeps the router connected to the ISP. If the WAN connection is disrupted and then re-linked, the router will automatically reconnect to the ISP.

•“Connect On Demand”: Auto-connects the router to the ISP when a user wants to use the Internet, and keeps it connected until the WAN idle timeout. The router will close the WAN connection if the