Intelligent Motion Systems IB462He warranty Features, Description, Options

FEATURES

•Very Low Cost

•Ultra Miniature

(1.2 x 2.4 x 0.28 inches)

(30 x 61 x 7.1 mm)

•Advanced Hybrid Design

•Full or Half Step

•Input Voltage

(+12 to +48 VDC)

•Output Current

(0.1A to 2A Per Phase)

•20 kHz Chopping Rate

•Alternative to Chipsets

DESCRIPTION

Based upon our popular IB462 Half/Full Step Driver, the IB462He is a low cost, high performance alternative to larger drives. The small size of the patented IB462He makes it ideal for systems where space is at a premium without sac- rifi cing performance.

The IB462He operates between +12 and +48 VDC. This high voltage allows for greater speeds at higher torque. Combine this with 2A per phase of output current and 160 watts of power and you have a low cost alternative to chipsets, all con- tained in a package that minimizes expensive real estate!

The IB462He is our smallest and lowest priced drive. It will reduce time to market, increase reliability, and it comes with a 2 year war- ranty. The IB462He represents af- fordable, state-of-the-art technology for the competitive edge needed in today’s market.

OPTIONS

The INT-462 is an optional plug- on interface board which can be used with the IB462He to facilitate testing, or in situations where panel mounting the IB462He is preferred. The INT-462 is much more than a simple pluggable in- terface. It adds a dynamic array of features to the IB462He, typi- cally found only on larger and more expensive drives. Features such as a +5 VDC switching power supply, +5 to +48 VDC opto-isolated inputs which are internally limited to 8mA, automatic current reduction, over current and short circuit protection, input capacitor, and fault and power LEDs. Wiring is done through a 15 pin removable screw terminal.

The OSC-462H analog speed con- trol board is an option for adding low cost, intelligent velocity control to the IB462He driver. The OSC-462H is powered by a single +12 to +48 VDC power supply, which will also

provide power for the IB462He. The control board features a digital os- cillator for accurate velocity control with an output frequency of up to 60 kilohertz. The IB462He driver plugs easily into a 21 pin receptacle attached to the OSC-462H. This device allows for a simple, cost effective solution in applications requiring variable velocity control. (Product details on page 8.)

Also available is the H-462H heat sink, which only adds 2.21 cubic inches (36.1 cubic cm) to the over- all footprint of the IB462He.

REV101805