Kentrox AAC-2TM, AAC-3, CELLSMART manual Select Physical Layer Modules

Page 8

AAC-3®, AAC-2™, and CellSMART®

Select Protocol Modules (continued)

OCTAL CES PROTOCOL MODULE

Protocols supported: Structured or unstructured circuit emulation over AAL1

Dynamic bandwidth allocation based on CAS signaling, idle code detection, or V.35 control signals Connections: 32 unicast or multicast per port, 256 per module

Output queuing: User-selectable depth of CDV absorption queue to 1 ms

Clocking: Synchronous or asynchronous (Adaptive)

Logical bundles: 1 DS0 to 24 DS0s (T1) or 31 DS0s (E1)

QUAD ETHERNET PROTOCOL MODULE

Bridging performance:

Filtering and forwarding rate: 14,880 pps each direction, each port, half-duplex

Address table: 4096 addresses per module (1024 static entries per AAC system)

Spanning Tree protocol: Per IEEE 802.1 D

LLC Encapsulation: Using AAL 5 per RFC 1483

Select Physical Layer Modules

See the PM/PLM compatibility matrix on page 3 for available Protocol and Physical Layer Module combinations

OCTAL IMA DS1 AND E1 PHYSICAL LAYER MODULES

Interface connector: RJ48C

Line rate: T1 - 1.544 Mbps per port

E1 - 2.048 Mbps per port

IMA rate: T1 - 1.536 to 12.288 Mbps

E1 - 1.984 to 15.872 Mbps

Differential delay: Up to 200 ms

ACP sync cells: User selectable at 32, 64, 128 or 256 cells

Link adjustment: Automatic adjustment on link failure or recovery

OCTAL DS1, DSX-1 AND E1 PHYSICAL LAYER MODULES

Interface connector: RJ48C

Line rate: DS1 (includes CSU) - 1.544 Mbps per port

DSX-1 - 1.544 Mbps per port

E1 - 2.048 Mbps per port

Channelization: NxDS0 up to full line rate

QUAD DSX-1/E1 PHYSICAL LAYER MODULE

Interface connector: DA15

Line rate: DSX-1 - 1.544 Mbps per port; E1 - 2.048 Mbps per port

Fractionalization: NxDS0 up to full line rate

QUAD V.35/EIA-530 PHYSICAL LAYER MODULE

Interface connector: DB25

Electrical: V.35, RS449, EIA-530, X.21

Line speed: 64 Kbps to 2.048 Mbps on each of four ports or up to 8.192 Mbps on one port

HSSI PHYSICAL LAYER MODULE

Interface connector: TIA/EIA-613 standard 50 position

Line speed: 1 Mbps to 52 Mbps

Continued on next page

www.kentrox.com8 800.733.5511

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Multi-service Access Concentrators AAC-3, AAC-2, and CellSMART DescriptionApplications ModulesElement Management Traffic ManagementPerformance Monitoring Standards ComplianceAAC Service Data Module SDM Supports ATM Managed Services SLA MonitoringSpecifications Common ModulesSelect Protocol Modules Select Physical Layer Modules Quad Ethernet Physical Layer Module DS3 and E3 Physical Layer ModulesOC-3C/STM1 Single and MULTI-MODE Physical Layer Modules Physical Layer Modules CellSMART 200 ATM IMA SystemsMemory Cards with Software AccessoriesPower Cords Multi-service Access Concentrators

AAC-2TM, CELLSMART, AAC-3 specifications

Kentrox, a leader in network management solutions, has developed several innovative platforms, notably the CELLSMART, AAC-3, and AAC-2TM. These products are specifically designed to optimize communication networks, ensuring high efficiency and reliability.

The CELLSMART platform is engineered to enhance cellular network management. Its primary feature is the ability to monitor and control performance in real-time, which enables operators to proactively manage network issues and optimize resource allocation. CELLSMART utilizes advanced analytics and machine learning algorithms to predict potential problems before they impact network performance. This predictive capability significantly reduces downtime and improves the overall user experience.

In addition, CELLSMART features a user-friendly interface that allows network engineers to visualize critical data easily. The platform supports a wide range of wireless technologies, including LTE and 5G, making it a versatile solution for various network environments. Another characteristic of CELLSMART is its scalability, allowing operators to expand their monitoring capabilities as their network grows.

The AAC-3, or Advanced Access Controller, is another key product from Kentrox. This versatile device supports a multitude of communication protocols, making it compatible with various systems and technologies. One of its standout features is its ability to consolidate data from multiple sources, providing a comprehensive view of network performance. The AAC-3 is equipped with robust security measures, ensuring that data integrity and privacy are maintained.

Moreover, the AAC-3 supports both wired and wireless connections, enabling flexible deployment in different environments. Its modular architecture allows for easy upgrades and modifications, ensuring longevity and adaptability to future technology advancements.

The AAC-2TM, or Advanced Access Controller 2 with Telecommunications capabilities, represents the next evolution in accessibility and control. It offers enhanced operational efficiency through automated configuration and management features. AAC-2TM is designed specifically for mission-critical telecommunications applications, where reliability and uptime are paramount.

This model emphasizes energy efficiency, contributing to sustainable operations while reducing costs. It integrates seamlessly with existing infrastructure, allowing for an easier transition and implementation process. With its enhanced troubleshooting tools, the AAC-2TM facilitates quick problem resolution, further optimizing network performance.

In summary, Kentrox’s CELLSMART, AAC-3, and AAC-2TM platforms provide comprehensive solutions for network performance monitoring, management, and optimization. Their advanced technologies and robust features position them as essential tools for communications operators seeking to enhance reliability and efficiency in their networks.
Top Page Image Contents