1.Press ScrollLock + ScrollLock + H. Two beeps will signal readiness for new preceding sequence selection.
2.Press the key you would like to use as your preceding sequence: Optional keys are SCROLL LOCK, CAPS, ESC, F12 or NUM LOCK.
A third beep indicates selection confirmation: You can now use the new preceding sequence to execute your hotkey commands
NOTE: Each keystroke within a hotkey sequence needs to be pressed within 2 seconds; otherwise, the hotkey sequence will not be validated.
OSD (On-Screen Display) Menus
With the Cat5 KVM Switch(es) installed and powered on for the first time, an OSD login
prompt will display. Since by default the password protection is disabled, you can just press Enter to bypass the prompt and access all the control features as ADMIN.
To activate the OSD menu, use the hotkey sequence ScrLk + ScrLk + Space Bar. To deactivate the menu, press ESC.
Main Menu:
•To select a computer: Press the Up/Down arrow keys to navigate; press PgUp/PgDn to scroll;
press Enter to select.
•To edit a computer name: Press Insert to edit; Enter to confirm; Esc to delete.
•To rotate through the Main, Video Setting, Setup and Status screens: Press F1.
•To save any modifications:
Press F2 and “Saving parameters” will display.
•To log out: Press F10. NOTE: This will lock the keyboard and mouse for security; a password will be needed to log back in.
Setup Menu:
•Auto Logout: specifies a time for auto logout
•OSD Timeout: specifies the time the OSD menu remains on screen.