Dongle Status Submenu: This screen presents the resident dongle firmware version on the switch and on various other dongles. You can also perform a manual upgrade of an individual dongle: Select the dongle and press Enter to confirm the upgrade. During the upgrade, a progress bar will display through completion.
• F4: lets you toggle between Auto Upg(rade) and Manual Upg(rade).
Port Switching
To switch ports using hotkeys, use this configuration sequence:
ScrLk + ScrLk + a + b + y + z, where ab = bank no., yz = port no., so that ScrLk + ScrLk + 0 + 2 + 1 + 6 switches to Bank 2, Port 16.
To switch ports using the OSD, go to the Main menu and use the Up/Down arrow keys and/or PgUp/PgDn keys to find and highlight the computer you want to switch to, then press Enter.
Log In/Out
The Log In and Log Out functions are dependent on the Password feature; that is, they are only useful when Password is enabled on the Setup menu. To maximize console security, of course, always enable Password and adopt a strict log in/out policy. Minimizing the Auto Logout timeframe can help restrict access, too.
Troubleshooting Tip
If a keyboard and/or mouse locks up, unplug the component(s) and then