ITT 801P5 operation manual

Page 34

Display Shows EROR

This message might appear while programming the 801P5 Smart-SwitchTM. The meaning depends on what is being programmed. Following are the possible causes and solutions.

Incorrect password entered

You have entered an incorrect password. Re-enter the correct password. If you have lost or forgotten the password, contact Neo-Dyn Customer Service for assistance.

Incompatible switch set points.

You have entered incompatible set points. Switch 1 and Switch 2 are independent of each other; however, the following rules apply to each switch:

The increasing set point must be at or below the Full Scale Output (F.S.O.) value; it cannot be less than 2% of F.S.O., and it must be at least 1% of F.S.O. above the decreasing set point.

The decreasing set point must be no lower than 1% of F.S.O.; it can be no higher than 99% of F.S.O.; and it must be at least 1% of F.S.O. below the increasing set point.

The minimum deadband is 1% of F.S.O.

Re-enter the set points to conform to the requirements.

Page 30 Installation and Operation Manual

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Installation Important Information Table of Contents Serial Communications Z Option Chapter Introduction RS232 COM Port MA Output Status Indicators Keypad 3 801P5 Smart SwitchTM When shown in the text, the LED displays are formatted as Chapter Installation Electrical Connections Schematic for AC Operation Schematic for DC Operation Return Data Send Data Receive Signal Ground Chapter Operation & Programming Front Panel Controls Menu Displaying SET Points 15 801P5 Smart SwitchTM Window Mode 17 801P5 Smart SwitchTM Select 19 801P5 Smart SwitchTM Additional Features 21 801P5 Smart SwitchTM To change the r-Loand r-Hi 23 801P5 Smart SwitchTM Page Chapter Analog Option Milliampere Output Calibration 4CAL 27 801P5 Smart SwitchTM Page Chapter Troubleshooting Page 31 801P5 Smart SwitchTM Page 33 801P5 Smart SwitchTM Page Chapter Serial Communications Z OptionPage Chapter Specifications Max Proof Range Bar Electrical Rating Code Input Power Warranty Information

801P5 specifications

The ITT 801P5 represents a remarkable stride in the field of advanced technological equipment designed for industrial applications. This versatile device is engineered for high performance and reliability, making it suitable for various environments and demanding tasks. Its robust construction and high-quality components ensure longevity and durability, which are crucial factors in industrial settings where equipment is subject to wear and tear.

One of the standout features of the ITT 801P5 is its powerful processing capabilities. Equipped with a high-performance processor, it enables efficient and rapid data processing, ensuring that users can complete tasks in a timely and efficient manner. The device also offers extensive memory options, allowing it to handle large amounts of data and multitasking without compromising performance.

In terms of connectivity, the ITT 801P5 comes with a wide range of ports and communication technologies. It supports various industrial communication protocols, which enhances its integration into existing systems. This flexibility is vital for industries that rely on seamless data exchange and process integration. The device's ability to interface with other machines and systems further extends its usability across different applications.

Moreover, the ITT 801P5 is designed with a focus on user experience and ease of use. Its intuitive interface simplifies operation, allowing users to navigate through functionalities and settings with ease. The device also incorporates advanced display technology, providing clear visibility under various lighting conditions, which is essential for operators in various industrial scenarios.

Safety and security are also paramount in the design of the ITT 801P5. The device features several built-in safety mechanisms and protocols to protect users and data integrity. Secure access controls and data encryption technologies guard against unauthorized access and data breaches, providing peace of mind for businesses that prioritize security.

Finally, the ITT 801P5 is built to operate in a range of environmental conditions. It is resistant to dust, moisture, and extreme temperatures, ensuring reliable performance even in challenging settings. This level of ruggedness makes it a preferred choice for various industries, including manufacturing, energy, and transportation.

In summary, the ITT 801P5 combines high processing power, versatile connectivity, user-friendly interface, robust security features, and environmental resilience. Its comprehensive suite of characteristics positions it as a leader in industrial technology solutions, offering businesses the tools they need to thrive in today’s competitive landscape.
Top Page Image Contents