ITT 801P5 operation manual

Page 36

Display alternates between OPEN and LOOP and the pressure reading

The OPEN LOOP message is displayed with the V option (4-20 mA analog output) in the following circumstances:

The analog loop is turned on, but nothing is connected to the analog output connector. In this case, press the [MENU] key to enter the programming mode. Use the [UP/DOWN ARROW] keys to set this option to OFF. Press the [STORE] key to temporarily save the change. Press the [RUN] key, followed by the [SELECT] key to save the change permanently and return on-line.

The analog loop is turned on and connected, but the connection has been broken. In this case, repair the broken connection, or turn the loop off using the method described in the previous paragraph.

Load resistance exceeds 600 ohms. In this case, reduce the resistance.

Display is blank

Press the [S1 INCR] key. If the display illuminates and displays the increasing set point for Switch 1, then the Disp display update option has been set to OFF.

If the display does not react, there has been an internal component failure. Contact Neo-Dyn Customer Service for assistance.

Display shows E-95

This code indicates that the internal manufacturing data, which is saved in the nonvolatile RAM, has become corrupt.

Power down the unit and then turn the power back on. If the unit continues to show E-95, contact Neo-Dyn Customer Service for assistance.

Page 32 Installation and Operation Manual

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Installation Important Information Table of Contents Serial Communications Z Option Chapter Introduction RS232 COM Port MA Output Status Indicators Keypad 3 801P5 Smart SwitchTM When shown in the text, the LED displays are formatted as Chapter Installation Electrical Connections Schematic for AC Operation Schematic for DC Operation Return Data Send Data Receive Signal Ground Chapter Operation & Programming Front Panel Controls Menu Displaying SET Points 15 801P5 Smart SwitchTM Window Mode 17 801P5 Smart SwitchTM Select 19 801P5 Smart SwitchTM Additional Features 21 801P5 Smart SwitchTM To change the r-Loand r-Hi 23 801P5 Smart SwitchTM Page Chapter Analog Option Milliampere Output Calibration 4CAL 27 801P5 Smart SwitchTM Page Chapter Troubleshooting Page 31 801P5 Smart SwitchTM Page 33 801P5 Smart SwitchTM Page Chapter Serial Communications Z OptionPage Chapter Specifications Max Proof Range Bar Electrical Rating Code Input Power Warranty Information

801P5 specifications

The ITT 801P5 represents a remarkable stride in the field of advanced technological equipment designed for industrial applications. This versatile device is engineered for high performance and reliability, making it suitable for various environments and demanding tasks. Its robust construction and high-quality components ensure longevity and durability, which are crucial factors in industrial settings where equipment is subject to wear and tear.

One of the standout features of the ITT 801P5 is its powerful processing capabilities. Equipped with a high-performance processor, it enables efficient and rapid data processing, ensuring that users can complete tasks in a timely and efficient manner. The device also offers extensive memory options, allowing it to handle large amounts of data and multitasking without compromising performance.

In terms of connectivity, the ITT 801P5 comes with a wide range of ports and communication technologies. It supports various industrial communication protocols, which enhances its integration into existing systems. This flexibility is vital for industries that rely on seamless data exchange and process integration. The device's ability to interface with other machines and systems further extends its usability across different applications.

Moreover, the ITT 801P5 is designed with a focus on user experience and ease of use. Its intuitive interface simplifies operation, allowing users to navigate through functionalities and settings with ease. The device also incorporates advanced display technology, providing clear visibility under various lighting conditions, which is essential for operators in various industrial scenarios.

Safety and security are also paramount in the design of the ITT 801P5. The device features several built-in safety mechanisms and protocols to protect users and data integrity. Secure access controls and data encryption technologies guard against unauthorized access and data breaches, providing peace of mind for businesses that prioritize security.

Finally, the ITT 801P5 is built to operate in a range of environmental conditions. It is resistant to dust, moisture, and extreme temperatures, ensuring reliable performance even in challenging settings. This level of ruggedness makes it a preferred choice for various industries, including manufacturing, energy, and transportation.

In summary, the ITT 801P5 combines high processing power, versatile connectivity, user-friendly interface, robust security features, and environmental resilience. Its comprehensive suite of characteristics positions it as a leader in industrial technology solutions, offering businesses the tools they need to thrive in today’s competitive landscape.
Top Page Image Contents