Kingston Technology KNE8WG, KNE8SE, KNE16WG, KNE16SE Hardware Installation, Front Panel, Power LED

6 Hardware Installation

Hardware Installation

Before you begin installing network cables, please take a few moments to familiarize yourself with the EtheRx hubs. The front and rear panels of the Stackable hubs are used for illustration.

Note: WorkGroup hubs have identical features except for the Stacking Ports.

Front Panel

	Utilization LEDs		UTP Port LEDs
	STACK IN STACK OUT									Stackable Hub
	UTIL %		LINK / ACTIVITY / PARTITION								KNE8TP/SE
	COLL %	BNC 1	2	3	4	5	6	7	8	CASCADE	PWR
Stacking		BNC Port LED								Cascade	Power LED
										Switch
Ports	Collision LEDs
	Fig. 1-1 KNE8TP/SE Front Panel
Utilization LEDs				UTP Port LEDs

STACK IN STACK OUT

UTIL %	ACTIVITY / PARTITION	LINK / ACTIVITY / PARTITION
COLL %	AUI BNC	1 2 3 4 5 6 7 8	9 10 11 12 13 14 15 16	CASCADE

Stackable Hub

PWRKNE16TP/SE

Stacking Collision LEDs	BNC Port LED	Cascade	Power LED
Ports	AUI Port LED	Switch

Fig. 1-2 KNE16TP/SE Front Panel

Power LED

The green LED indicates the power status. The LED will light when the AC power transformer is connected from a power source to the hub.

Stacking Ports (SE models only)

The Stackable hub models (KNE8TP/SE and KNE16TP/SE) include a “Stack-In”and “Stack-Out”port for stacking up to five (5) SE hubs in any combination of 8-Port and 16-Port models. Refer to the section, “Stacking EtheRx SE Hubs” on page 13 for additional information.

Kingston Technology Company EtheRx User’s Guide - Rev. B00