Examine the Front and Rear Panels

Page 14

KD-MSW4x2 Operating Instructions

Become familiar with the front and rear panels of the KD-MSW4x2 unit.

Pushbutton to Select Input
Input Selected LEDs	IR Remote Sensor

Front Panel

The front panel contains the pushbutton selection switches and associated input select LED indicators for Output 1 and Output 2:

›For each output, select source Input 1, 2, 3, or 4

The IR remote control sensor is also located on the front panel:

›A clear line-of-site to the sensor is required when operating the IR remote control provided with the unit

The rear panel contains 4 Input Ports and 2 Output Ports:

›Each Port is comprised of 6 color-coded RCA connectors

›Each Port can support:

➔YPbPr component video, analog stereo left and right audio, and digital PCM audio

➔RGBHV video and digital PCM audio

➔RGB video with sync on the green channel, analog stereo left and right audio, and digital PCM audio

Page 15

KD-MSW4x2 Operating Instructions

›Each connector can accommodate various signals, on a shared basis:

➔Red Connector: Pr/R

»Pr label is for component video

»R label is for the red channel for RGBHV video

➔Green Connector: Y/G

»Y label is for component video

»G label is for the green channel for RGBHV video

➔Blue Connector: Pb/B

»Pb label is for component video

»B label is for the blue channel for RGBHV video

➔White Connector: L/H

»L label is for the left analog stereo audio channel

»H label is for the horizontal sync for RGBHV video

➔Red Connector: R/V (Right analog stereo audio, or vertical sync for RGBHV video)

»R label is for the right analog stereo audio channel

»V label is for the vertical sync for RGBHV video

➔Black Connector: PCM

»For PCM digital coax audio

›The following connectors are also provided on the rear panel:

➔RS-232 Connector

➔IR Extender sensor

➔Wired IR serial port

➔External power supply connector