Key Digital 8400 Non-Backplane External Storage Controllers, XMI-based Storage Controllers

Page 9

 

AlphaServer 8400

 

 

Step 6—Storage Controllers (continued)

CIPCA-AA

PCI-to-CI Adapter (OpenVMS only)— Requires OpenVMS V6.2-1H3 or V7.1, minimum System

 

Console Firmware Revision 4.0-4. Maximum four per PCI, 26 per system running OpenVMS V7.1.

 

Uses one PCI slot for adapter and one EISA slot for power only. Note: KFE70 option is not required.

CIPCA-BA

Same as above except uses two PCI slots

BNCIA-xx

Computer interconnect cable setsConnects CIPCA to Star Coupler. Select required length—10, 20,

 

or 45 m (10 m = 32.8 ft, 20 m = 65.6 ft, 45 m = 147.6 ft)

Note: For OpenVMS systems with greater than 1 GB of memory, the following TIMA patch kits are required to support KZPAC op- tions:V 6.2 kit-ALPDRIV04_062; V7.1 kit-ALPDRIV01_071.

XMI-based Storage Controllers

KZMSA-AB

Fast single-ended SCSI-2 Disk/Tape Adapter— OpenVMS supports six per XMI, maximum 12 per

 

 

system. DIGITAL UNIX supports 10 per XMI, maximum 16 per system (uses one XMI slot).

 

 

Provides two single-ended SCSI-2 buses. KZMSA supports DECsafe Available Server.

 

CK-KZMSA-LA

Two 30” internal cabinet cables One kit per KZMSA required.

 

CIXCD-AC

XMI CI Controller— OpenVMS supports four per XMI, maximum 10 per system. DIGITAL UNIX

 

 

supports one per XMI, maximum one per system (uses one XMI slot). The CIXCD requires one

 

 

BNCIA cable set to connect system to Star Coupler. OpenVMS Cluster software license required for

 

 

each system when multiple OpenVMS systems are used in cluster environment. Note: One CIXCD is

 

 

supported on DIGITAL UNIX systems for expanded disk interconnect capability only.

 

BNCIA-xx

Computer interconnect cable setsConnects Star Coupler to system and SW800. Select required

 

 

length—10, 20, or 45 m (10 m = 32.8 ft, 20 m = 65.6 ft, 45 m = 147.6 ft).

 

 

 

 

 

 

 

 

 

 

Step 6a—Non-Backplane External Storage Controllers

HSZ50 family of SCSI Storage Array Controllers are supported under DIGITAL UNIX V3.2G and V4.0A and OpenVMS V6.2-1H3. A DIGITAL UNIX patch OSF405-034 is required for dual redundant failover.

HSJ50 family of CI Storage Array Controllers are supported under OpenVMS V6.2-1H3 with CIPCA-AA/BA or CIXCD-AC CI controllers. QB-5C4AA-SA software kits are required for each external cache (1 for HSJ50, 2 for HSJ52, 4 for HSJ54).

HSD50 family of DSSI Storage Array Controllers are supported under OpenVMS V6.2-1H3 with minimum SRM console version V4.1-6.

-Controllers require KZPSA, KZMSA, KFPSA, CIXCD or CIPCA SCSI adapters or controllers, as appropriate.

-HSZ50-Ax requires one QB-5CJAA-SA kit.

-HSZ52-Ax requires two QB-5CJAA-SA kits.

-HSZ54-AJ requires four QB-5CJAA-SA kits.

HSZ50-AF

StorageWorks RAID Array 450/HSZ50 32 MB SCSI controller, 6 SCSI channels, 36 SCSI-2 device

 

connections, 32 LUN maximum, 32 MB cache module, single external cache battery system building

 

block.

HSZ50-AH

StorageWorks RAID Array 450/HSZ50 64 MB SCSI controller, 6 SCSI channels, 36 SCSI-2 device

 

connections, 32 LUN maximum, 64 MB cache module, single external cache battery system building

 

block.

HSZ50-AJ

StorageWorks RAID Array 450/HSZ50 128 MB SCSI controller, 6 SCSI channels, 36 dual, 42 single

 

SCSI-two-device connections, 32 LUN maximum, 128 MB cache module, single external cache

 

battery system building block.

HSZ52-AF

StorageWorks RAID Array 450/HSZ50 64 MB dual SCSI controllers, 12 SCSI channels, 36 SCSI-

 

two-device connections, 32 LUN maximum, two cache modules, one dual external cache battery

 

system building block, two external cache batteries, two 2-meter cables.

HSZ52-AH

StorageWorks RAID Array 450/HSZ50 128 MB dual SCSI controllers, 12 SCSI channels, 36 SCSI-

 

two-device connections, 32 LUN maximum, two cache modules, one dual external cache battery

 

system building block, two external cache batteries, two 2-meter cables.

HSZ52-AJ

StorageWorks RAID Array 450/HSZ50 256 MB dual SCSI controllers, 12 SCSI channels, 36 SCSI-

 

two-device connections, 32 LUN maximum, two cache modules, one dual external cache battery

 

system building block, two external cache batteries, two 2-meter cables.

3.214 Alpha Servers

Image 9
Contents Product Description V97-2.1-24 JulAlphaServer AlphaServer 8400 Base Servers includeBase Systems AlphaServer 8400 Expanded Base Servers include 5/300 System Building Blocks Additional CPU Modules SMP Upgrades AlphaServer Expansion PackagesMemory Memory Upgrades Prestoserve Non-Volatile Random Access Memory NvramO Expansion Buses System I/O Modules Storage ControllersPCI-based Storage Controllers Storage Controllers XMI-based Storage Controllers Non-Backplane External Storage ControllersWide Scsi Options StorageStorageWorks Expansion Packages StorageBit Disk Drives Tape DevicesExternal Storage I/O Expansion Cabinet External StorageStorageWorks Expansion Packages LAN Communications Controllers-KFTIA-AA Daughter Cards Networks and CommunicationsLAN Communications Controllers PCI based FDDIcontroller Copper-Dual attachment station UTPLAN Communications Controllers XMI based LAN Communications Controllers Eisa basedLocal and Wide Area Communications Servers Network Connectivity ProductsMemory Channel Controller Console Terminal Power Expansion ComponentsExpansion-System Cabinet and I/O Expansion Cabinet System CabinetSingle-Phase to Three-Phase Power Upgrade Three-Phase Expansion ComponentsBattery backup I/O expansion cabinet For new system orders, or for systems shipped after JuneSoftware Digital Unix Media and DocumentationOpenVMS Concurrent Use Licenses Hardware and Software Supplemental Support Services Software-Americas and Asia Pacific only Add Eisa options Unix AlphaServer Optional Controller Configuration TableCD-ROM AlphaServer System DiagramPhysical Characteristics Operating Shipping AlphaServer SpecificationsUPS Models AlphaServer UPS SolutionsOptions UPS Communications Cable Kit