Juniper Networks MX240, MX480 Baseline, Software, gathering basic system management information

MX240 and MX480 Ethernet Services Router Fan Tray Installation Instructions

Table 2: JUNOS Software Network Operations Guides

Book	Description
Baseline	Describes the most basic tasks for running a network using Juniper
	Networks products. Tasks include upgrading and reinstalling JUNOS
	software, gathering basic system management information,
	verifying your network topology, and searching log messages.
Interfaces	Describes tasks for monitoring interfaces. Tasks include using
	loopback testing and locating alarms.
MPLS	Describes tasks for configuring, monitoring, and troubleshooting
	an example MPLS network. Tasks include verifying the correct
	configuration of the MPLS and RSVP protocols, displaying the status
	and statistics of MPLS running on all routing platforms in the
	network, and using the layered MPLS troubleshooting model to
	investigate problems with an MPLS network.
MPLS Log Reference	Describes MPLS status and error messages that appear in the output
	of the show mpls lsp extensive command. The guide also describes
	how and when to configure Constrained Shortest Path First (CSPF)
	and RSVP trace options, and how to examine a CSPF or RSVP
	failure in a sample network.
MPLS Fast Reroute	Describes operational information helpful in monitoring and
	troubleshooting an MPLS network configured with fast reroute
	(FRR) and load balancing.
Hardware	Describes tasks for monitoring M-series and T-series routing
	platforms.

To configure and operate a J-series Services Router running JUNOS software with enhanced services, you must also use the configuration statements and operational mode commands documented in JUNOS configuration guides and command references. To configure and operate a WX Integrated Services Module, you must also use WX documentation.

Table 3: JUNOS Software with Enhanced Services Documentation

Book	Description
JUNOS Software with Enhanced Services Design	Provides guidelines and examples for designing and
and Implementation Guide	implementing IP Security (IPSec) virtual private networks
	(VPNs), firewalls, and routing on J-series routers running
	JUNOS software with enhanced services.
JUNOS Software with Enhanced Services J-series	Explains how to quickly set up a J-series router. This
Services Router Quick Start	document contains router declarations of conformity.
JUNOS Software with Enhanced Services J-series	Provides an overview, basic instructions, and specifications
Services Router Getting Started Guide	for J-series Services Routers. This guide explains how to
	prepare a site, unpack and install the router, replace router
	hardware, and establish basic router connectivity. This guide
	contains hardware descriptions and specifications.

14■ List of Technical Publications