1) When the phone is in the standby mode, press and hold cid/menu. The following screen appears.
2) Press 3 or press 
twice to select ¨Area Code¨.
3) Press select.
4)Use the number keys (0 to 9), #/ 
, */tone/ 
or delete/ch to enter the
5)Press select. A confirmation tone sounds and the displayed area code is entered.
6)Press end or return the handset to the base unit. The handset returns to the standby mode.
When the area code has already been stored in memory, the stored area code will be displayed. To change it, use the delete/ch and number keys to enter the new area code. Then press select. A confirmation tone sounds.
To complete the setting, press end or return the handset to the base unit.
Choosing the dialing mode
Most phone systems use tone dialing which sends DTMF tones through the phone lines. However some phone systems still use pulse dialing such as in rural areas. The default setting is tone dialing. Depending on your dialing system, set the mode as follows:
Make sure your battery pack is fully charged before choosing the dial mode.
GETTING STARTED
G E T T I N G S T A R T E D [ 15 ]