ICP DAS USA SST-2450 user manual External Antenna

Page 23

9.External Antenna

Using an external antenna in conjunction with the SST-2450 allows the device to be used outdoors. The antenna is even water resistant. Simply replace the default antenna with an external antenna and you will be able to transmit data across distances of up to 1KM.

9.1.ANT-3(Directional)

Gain: 3dBi

Polarization: circular

Power handling: 5W

Impedance: 50 Ohms

Connector: SMA

Cable: RG-58, 100cm

Gain Pattern

Usage Diagram

SST-2450 Wireless Modem User’s Manual Ver1.5, Feb /2003, OMH-030-10,---23

Image 23

Contents SST-2450 Wireless Modem User’s Manual Table of Contents Introduction PN code rate SpecificationsProduct Description SST-2450Block diagram Peer to Peer ApplicationsPC to PC connections --Using Mode Using Mode Both SST-2450 modules are setting as follows Both SST-2450 modules settings are as followsHalf-Duplex Connecting a PC to a PLC Using ModeUsing the 7188 as a Bridge -- Using Mode Application Network communicationApplication Quick Start instructions for the SST-2450 Installing the softwarePage SST-2450 Settings Page Testing the SST-2450 Testing error TroubleshootingSetting error Dimensions Din-rail Mounting External Antenna ANT-8Omni directional ANT-12PDirectional Appendix