Test and Adjustment, Specifications | Heath Zenith SL-5412 specs

Clamp Screw

Ball Joint

Aim Sensor

Down for Short

Coverage

Aim Sensor

Higher for Long

Coverage

TEST AND ADJUSTMENT

❒Turn on the circuit breaker and light switch.

NOTE: Sensor has about 1 1/2 minutes warm up period before it will detect motion. When first turned on, wait about 1 1/2 minutes.

❒Turn the RANGE control to the mid position and the ON-TIME control to the TEST position.

ON-TIME				RANGE

10 5 1 TEST

MIN MAX

Bottom of Sensor

Avoid aiming the control at:

•Objects that change temperature rapidly, such as heating vents and air conditioners. These heat sources could cause false triggering.

•Areas where pets or traffic may trigger the control.

•Nearby large, light-colored objects reflecting light may trigger the shut-off feature. Do not point other lights at the sensor.

	180°
8 ft.
(2.4 m)
70 ft.
(21 m)
Maximum Range	Maximum
	Coverage Angle

The detector is most sensitive to motion across its field of view.

❒ Loosen the clamp screw in the sensor ball joint and gen- tly rotate the sensor.

❒ Walk through the coverage area noting where you are when the lights turn on (also, theLEDwillflashseveraltimes when motion is detected). Move the sensor head up, down, or sideways to change the coverage area. Keep the sensor at least 1" (2.5 cm) away from the lamps.

❒Adjust the RANGE as needed. RANGE set too high

may increase false triggering. ❒ Secure the sensor head by tightening the clamp screw.

Do not overtighten the screw.

❒Set the amount of TIME you

want the lights to stay on after motion is detected (1, 5, or 10 minutes).

SPECIFICATIONS

Range . . . . . . . . . . . . Up to 70 ft. (21 m) [varies with surrounding temperature].

Sensing Angle . . . . . . Up to 180°

Electrical Load . . . . . . Up to 300 Watts Maximum In- candescent [Up to 150 Watts Maximum each lamp holder.]

Power Requirements . 120 VAC, 60 Hz

Operating Modes . . . . TEST, AUTO and MANUAL

MODE

Time Delay . . . . . . . . 1 , 5, 10 minutes

DESA Specialty Products™ reserves the right to discon- tinue products and to change specifications at any time without incurring any obligation to incorporate new fea- tures in products previously sold.

Motion

Sensor

Least Sensitive

Most Sensitive

595-5767-02

SL-5412 specifications

The Heath Zenith SL-5412 is a remarkable piece of technology in the realm of outdoor lighting and security solutions. With its blend of aesthetic design and advanced functionality, this motion sensor light fixture has become a popular choice for homeowners seeking to enhance their exterior spaces.

One of the standout features of the SL-5412 is its dual-lens motion sensing technology, which is designed to detect movement with impressive accuracy. The dual passive infrared sensors work simultaneously to cover a vast area, significantly reducing the chances of false alarms that can occur with single-sensor systems. This technology allows the fixture to be adjustable, providing a customizable experience that can suit various outdoor settings.

The SL-5412 also boasts a powerful LED light source, which delivers bright illumination while being energy-efficient. The fixture typically generates a lumen output that provides excellent visibility for any outdoor area, enhancing safety and security around the home. Additionally, LED bulbs have a longer lifespan compared to traditional incandescent bulbs, reducing the frequency and cost of replacement.

A key characteristic of the Heath Zenith SL-5412 is its weather-resistant construction. Built to withstand diverse weather conditions, the fixture is ideal for outdoor use, ensuring durability and reliability in any climate. Its rugged design not only protects it from rain and wind but also contributes to long-term maintenance-free operation.

The adaptability of the SL-5412 is further highlighted by its adjustable settings. Users can easily modify the sensitivity of the motion sensors, the duration of light activation, and the ambient light threshold, allowing for precise control over the unit’s performance in response to surrounding conditions.

Another notable aspect of this security light is its sleek design, which blends seamlessly with most home exteriors. Available in multiple finishes, the SL-5412 enhances the aesthetic appeal of outdoor spaces while serving its primary purpose of providing safety and visibility.

In summary, the Heath Zenith SL-5412 combines modern technology with thoughtful design features to create a versatile solution for outdoor lighting and security. Its dual-lens sensing technology, energy-efficient LED output, weather-resistant durability, and customizable settings make it an exceptional choice for any homeowner looking to improve their outdoor environment. As security and efficiency continue to be a priority in home improvement, the SL-5412 stands out as a reliable and effective option.