Operation, Model SL-5210 | Heath Zenith instruction

Motion Sensor

Decorative Lighting

Control

Model SL-5210

Features

¥Turns on lighting when motion is detected.

¥Automatically turns lighting off.

¥Photocell keeps the lighting off during daylight hours.

Requirements

¥The Light Control requires 120-volts AC.

¥If you want to use Manual Override, the control must be wired through a wall switch.

¥Some codes require installation by a qualified electrician.

¥Switch Module mounts into a standard 4" x 4" junction box.

OPERATION

Mode:	On-Time:	Works: Day	Night

Test	5 Sec	x	x
Auto	1, 5, 10 min.		x
Manual	Until Dawn*		x

* resets to Auto Mode at dawn.

Note: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate.

TEST

Put the ON-TIME switch on the bottom of	ON-TIME
Put the ON-TIME switch on the bottom of
the sensor in the TEST position.
the sensor in the TEST position.
	10 5 1 TEST

AUTO

Put the ON-TIME switch in the 1, 5, or 10		ON-TIME
minute position.
minute position.

		10 5 1 TEST

MANUAL OVERRIDE

The SL-5210 package includes:

¥The Sensor Module and Switch Module

¥Three wire nuts

¥Two sensor module screws

Typical Installation

Manual mode only works at night because daylight returns the sensor to AUTO.

Flip the light switch off for one second then back on to toggle between AUTO and

MANUAL MODE.

1 Second OFF

then...

Switch

Module In

Junction Box

Behind Light

Fixture

Existing Light Fixture

Sensor Cord

Sensor Module

Drip Loop

Manual mode works only with the ON-TIME switch in the 1, 5, or 10 position.

... back on.

Mode Switching Summary

	TEST	Move ON-TIME Switch to
	TEST

			1, 5 or 10 minutes

	AUTO		Flip light switch off


			for one second then
MANUAL MODE			back on*
MANUAL MODE			back on*

NOTE: The Drip Loop is neccessary to prevent rain from running down the cord to the Sensor Module.

*If you get confused while switching modes, turn the power off for one minute, then back on. After the calibration time the control will be in the AUTO mode.

595-4991-06

SL-5210 specifications

The Heath Zenith SL-5210 is a state-of-the-art motion-activated light fixture designed to enhance both security and convenience around residential properties. With its cutting-edge features, this outdoor security light has become a favorite among homeowners looking for reliable illumination and safety.

One of the standout characteristics of the SL-5210 is its advanced motion detection technology. Equipped with a passive infrared (PIR) sensor, this light can detect movement from up to 70 feet away, providing a broad coverage area. This capability allows it to monitor driveways, walkways, and other key points of entry, ensuring that any movement is promptly illuminated.

The SL-5210 also offers adjustable settings that allow users to customize the light’s sensitivity, duration, and the range of detection. Users can easily modify the time the light stays on after detecting motion, adjusting it from a short burst of light to several minutes, based on their needs. The sensitivity settings are also user-friendly, enabling adjustments based on environmental factors, ensuring that the light is triggered only when necessary.

Energy efficiency is another key feature of the Heath Zenith SL-5210. Utilizing LED bulbs, this light is designed to provide bright illumination while consuming minimal power. LEDs have a significantly longer lifespan compared to traditional incandescent bulbs, contributing to lower energy bills and reduced maintenance costs.

Durability is a significant consideration for any outdoor fixture, and the SL-5210 does not disappoint. Constructed with high-quality materials, it is weather-resistant, allowing it to withstand various outdoor elements, including rain, wind, and extreme temperatures. This rugged design ensures that it can provide reliable service year-round.

The installation process for the SL-5210 is straightforward, as it comes with all necessary hardware and a clear installation guide. This accessibility empowers homeowners to set up the security light with ease, enhancing the overall user experience.

In summary, the Heath Zenith SL-5210 motion-activated light fixture combines advanced motion detection technology, energy efficiency, customizability, and robust durability. It is an ideal solution for enhancing residential security while providing reliable illumination for outdoor areas. Homeowners seeking a dependable outdoor lighting solution will find that the SL-5210 meets and exceeds their expectations.