Installation, Mounting Sensor | Heath Zenith SL-5210 specification

INSTALLATION

IMPORTANT: TURN OFF THE POWER TO THE LIGHTING CIRCUIT AT THE CIRCUIT BREAKER OR FUSE BOX to avoid electrical shock.

❒Remove the fixture and fixture strap (if present) and disconnect the wiring.

				Turn power off
		Circuit		before wiring!
		Breaker		Wire Connectors
		or Fuse		Wire Connectors
		or Fuse
		Box		Switch
		Box		Switch

❒Plug the sensor cord into the switch module. The sensor cord's plug is polarized for proper installation.

❒Place the Switch Module into the junction box. Before mounting the fixture cover, make sure that the cord is flat and smoothly placed against the wall so that the cord will not be damaged when the fixture is re-installed. Make sure that the protective sleeve over the sensor cord extends slightly beyond the fixture cover.

❒Reinstall the fixture.

To Light	4" x 4"
Fixture	Junction Box

Black

White

Fixture

House Wiring

Sensor Wiring

Black Black

White

Red

Black White

Light Control

Switch Module In Junction Box

Typical Wiring

¥Connect the RED Light Control wire to the BLACK fixture wire.

¥Connect the BLACK house wire to the BLACK Light Control wire.

¥Connect the WHITE Light Control wire to both the WHITE house wire and the WHITE fixture wire.

If used, join the grounding wire from the power source to the fixture grounding wire (usually a bare wire). Secure at the junction box grounding screw. Connect additional lamps (up to 500 W.) to the white and red control wires.

Drip Loop

Mounting Sensor

❒Attach the sensor module to the wall with the screws provided. Place the sensor below or to the side of the fixture. It may be necessary to tilt the sensor head up while mounting.

Important Installation Information

When installing the sensor, make sure the wire comes out of the bottom of the bracket and forms a "drip loop" (shown above). This will prevent water from entering the sensor head or junction box.

2	595-4991-06

SL-5210 specifications

The Heath Zenith SL-5210 is a state-of-the-art motion-activated light fixture designed to enhance both security and convenience around residential properties. With its cutting-edge features, this outdoor security light has become a favorite among homeowners looking for reliable illumination and safety.

One of the standout characteristics of the SL-5210 is its advanced motion detection technology. Equipped with a passive infrared (PIR) sensor, this light can detect movement from up to 70 feet away, providing a broad coverage area. This capability allows it to monitor driveways, walkways, and other key points of entry, ensuring that any movement is promptly illuminated.

The SL-5210 also offers adjustable settings that allow users to customize the light’s sensitivity, duration, and the range of detection. Users can easily modify the time the light stays on after detecting motion, adjusting it from a short burst of light to several minutes, based on their needs. The sensitivity settings are also user-friendly, enabling adjustments based on environmental factors, ensuring that the light is triggered only when necessary.

Energy efficiency is another key feature of the Heath Zenith SL-5210. Utilizing LED bulbs, this light is designed to provide bright illumination while consuming minimal power. LEDs have a significantly longer lifespan compared to traditional incandescent bulbs, contributing to lower energy bills and reduced maintenance costs.

Durability is a significant consideration for any outdoor fixture, and the SL-5210 does not disappoint. Constructed with high-quality materials, it is weather-resistant, allowing it to withstand various outdoor elements, including rain, wind, and extreme temperatures. This rugged design ensures that it can provide reliable service year-round.

The installation process for the SL-5210 is straightforward, as it comes with all necessary hardware and a clear installation guide. This accessibility empowers homeowners to set up the security light with ease, enhancing the overall user experience.

In summary, the Heath Zenith SL-5210 motion-activated light fixture combines advanced motion detection technology, energy efficiency, customizability, and robust durability. It is an ideal solution for enhancing residential security while providing reliable illumination for outdoor areas. Homeowners seeking a dependable outdoor lighting solution will find that the SL-5210 meets and exceeds their expectations.