CD CHANGER OPERATION
changers first play all of the tracks on a CD in random order and then select the next CD in the changer.
Stopping the MIX function
➮To stop the MIX function, press 5 MIX >repeatedly until “MIX OFF” appears briefly in the display and MIX no longer lights up.
Scanning all of the tracks on all of the CDs (SCAN)
➮To scan all of the tracks on all of
the CDs in ascending order, press OK ; for longer than two sec- onds.
“SCAN” will appear in the display.
Stopping the SCAN function
➮To stop the SCAN function, press OK ;briefly.
The track currently scanned will contin- ue playing.
Note:
It is possible to adjust the scan time. For more information, read the section on “Adjusting the scan time” in the chapter on “Radio Operation”.
Interrupting playback (PAUSE)
➮Press 3 
>.
“PAUSE” will appear in the display.
Stopping PAUSE
➮Press 3 
>during the pause. Playback will resume.
Naming CDs
To help you to identify your CDs more easily, the car audio system allows you to individually name up to 99 CDs. The name can be made up of up to seven letters.
If you attempt to enter more than 99 names, “FULL” will appear in the display.
Entering/editing CD names
➮Press MENU 8.
➮Press 
:to select “CDC NAME”.
➮Press
or 
:.
The car audio system is now in selec- tion mode.
➮Press 
:to select the CD you would like to name.
➮Press
or 
:.
Now you are in the edit mode. If the CD you selected does not yet have a name, seven dashes will appear in the display.
➮The first input position will flash.
➮Press 
:to select the letter you want to enter. If you want to leave this position blank, select the dash.
➮Press
or 
:to move the cur- sor to a different input position.
➮Press MENU 8or OK ;to store the name.
Deleting a CD name
➮You are listening to a CD and would like to delete its name.
➮Press MENU 8.
18