Hardwired Mechanical Chimes

P.O. Box 90004

Bowling Green, KY 42102-9004

Illustrations may vary from actual chime unit.

MOUNTING SUGGESTIONS

•Power must be supplied from a 16 Volt, 10 Watt transformer or 16 Volt, 15 Watt transformer (Heath®/Zenith models 122C, 121AC, or 125C).

•Mount door chime in a central location so it can be heard throughout the home.

•See actual unit for orientation of base.

•Use wall anchors if not mounting directly to wall stud.

•Use mounting holes located on both sides of base.

•Route wires through wire entrance holes (see Figure 1).

NEW INSTALLATION WIRING	Rear Push Button			Front Push Button
WARNING:Turn power off at fuse or	(If Applicable)		Wire Nut	Front Push Button
WARNING:Turn power off at fuse or	(If Applicable)		Wire Nut
circuit breaker before installing		Transformer
transformer. Follow all national and
local codes.			Cover Pin
1. MountTransformer: Transformers			Cover Pin
1. MountTransformer: Transformers
should be mounted on or near a
junction box. They can also be
mounted to the electrical service
panels. Junction boxes in utility				Wire Entrance
rooms, crawl spaces, or basements				Wire Entrance
rooms, crawl spaces, or basements				Holes
are preferred. Avoid attic locations.	TRANS REAR	FRONT		Holes
are preferred. Avoid attic locations.
2. Install 16 Volt, 10 Watt transformer
2. Install 16 Volt, 10 Watt transformer
according to the instructions supplied				DO NOT OIL	FRONT REAR TRANS
with transformer. Note: For multiple
mechanical chimes, use a 16 Volt,
15 Watt transformer. Failure to use
15 Watt transformer. Failure to use
a transformer with adequate power				Mounting
will result in loss of sound or may re-	Mounting			Mounting
will result in loss of sound or may re-				Hole
sult in the system being inoperative.
	Slot
	Slot
3. Run two No. 20 AWG or better bell
wires (Heath®/Zenith No. 196C or No.			Optional Second Mechanical Chime
199C accessory wire) to the chime			Optional Second Mechanical Chime
199C accessory wire) to the chime	Base Style “A”			Base Style “B”
location. Strip away 1/2" of insulation	Base Style “A”			Base Style “B”
from end of wires. Connect each wire			Figure 1
to transformer (see Figure 1).

4.Label Transformer Wires: Using masking tape or wire tags provided on packaging, label one wire “T” and the other “C”.

598-1112-01

121AC, 125C, 122C specifications

Heath Zenith has established a reputation for innovation and quality in the outdoor lighting and security market with its range of products designed to enhance safety and convenience around the home. Among their notable offerings are the Heath Zenith 122C, 125C, and 121AC, each boasting unique features and advanced technologies.

The Heath Zenith 122C is a motion-activated security light designed with both functionality and aesthetics in mind. This model features a powerful 180-degree motion sensor that detects movement up to 30 feet away. One of its standout technologies is the adjustable sensitivity feature, which allows users to customize the detection range according to their needs. Additionally, the 122C offers dual lights that provide excellent illumination for entryways, garages, and outdoor spaces, ensuring that any movement is clearly visible.

Similarly, the Heath Zenith 125C enhances outdoor security with a robust design and advanced features. This model is equipped with a 240-degree motion sensor, which provides a wider range of coverage compared to its counterpart. The 125C also includes a convenient test mode that makes it easy for users to adjust the positioning of the sensor and lights to achieve optimal performance. Users appreciate the weather-resistant casing that protects the light from environmental elements, ensuring durability and longevity.

The Heath Zenith 121AC light features a combination of innovation and ease of use. It stands out for its integrated dusk-to-dawn sensor, which automatically activates the light at sunset and turns it off at sunrise, providing hassle-free operation. This feature not only enhances convenience but also contributes to energy savings by ensuring the light is only on when needed. The 121AC is designed with LED technology, making it energy-efficient, providing bright illumination, and reducing maintenance costs due to the extended lifespan of LEDs.

All three models come with adjustable light timers that allow users to set how long the light stays on after being triggered. This ensures flexibility for various applications, whether for security purposes or general outdoor lighting. The Heath Zenith 122C, 125C, and 121AC lights exemplify the perfect blend of practical features and advanced technologies, making them excellent choices for homeowners looking to improve safety and illumination around their properties. With reliable performance and user-friendly features, these models reflect Heath Zenith's commitment to quality and innovation in outdoor lighting solutions.