Replacement Installation Wiring, Helpful Hints

5.Mount push button(s) to door frame(s). Run two No. 20 AWG bell wires from push button(s) to the chime location. Strip away 1/2" of insulation from end of wires. Connect each wire to push button(s) (see Figure 1).

Label Front Push Button Wires: Using masking tape or wire tags provided on packaging, label one wire “F” and the other “C”.

Label Rear Push Button Wires: Using masking tape or wire tags provided on packaging, label one wire “R” and the other “C”.

6.At the chime, pull all wires through wall cavity and out through a 1/2" hole in the wall board. Route wires through wire entrance hole(s).

7.Mount chime base to wall using screws provided.

8.Strip away 1/2" of insulation from end of wires. Connect wire “F” to the screw terminal marked “FRONT”. Connect wire “T” to screw terminal marked “TRANS”. Connect wire “R” to screw ter- minal marked “REAR” (see Figure 1).

9.Twist together the wires labeled “C” and secure them with a UL approved wire nut.

10.Place chime cover securely over base.

11.Restore power. Press push button(s) to test chime.

REPLACEMENT INSTALLATION WIRING

For replacing an existing transformer, follow step 2 above.

WARNING: Turn power off at fuse or circuit breaker before installing transformer.

1.Verify existing chime/bell system works correctly. If no sound is heard, see Troubleshooting section for more information.

2.Check transformer power rating. This chime requires a minimum 16 Volt, 10 Watt transformer.

3.Remove cover from existing chime and disconnect wires from terminal screws. Using masking tape or wire tags provided on packaging, label all wires (“F”-Front Push Button, “T”-Transformer, “R”-Rear Push Button) as you remove them according to terminal markings.

4.Remove existing chime base from wall.

5.Route wires through wire entrance hole(s) in new chime base.

6.Mount chime base to wall using screws provided.

7.Connect wire “F” to the screw terminal marked “FRONT”. Connect wire “T” to screw terminal marked “TRANS”. Connect wire “R” to screw terminal marked “REAR” (see Figure 1). Note: The common connection may exist elsewhere in the original installation and may not be visible.

8.Place chime cover securely over base.

9.Restore power. Press push button(s) to test chime.

Note: For multiple mechanical chimes, use a 16 Volt, 15 Watt transformer.

HELPFUL HINTS

•Electrical work must be in accordance with national and local electrical codes. If in doubt, consult a qualified electrician. Turn power off at fuse or circuit breaker before installing/ replacing transformer.

•Many chimes, bells, and buzzers are installed with a 10 Volt, 5 Watt transformer. This chime requires a minimum 16 Volt, 10 Watt transformer.

•For replacement installation, identify and tag wires before removing them according to terminal markings: “F”-Front Push Button, “R”-Rear Push Button, and “T”-Transformer.

•For new installations install #20 AWG bell wire in pairs from push button(s) and transformer to chime. Do not pinch wire or damage its insulation. Heath®/Zenith accessory wire (No. 196C or No. 199C) is available for chime installations.

•Clean wood, plastic, and metal parts with mild soap and warm water. Never use cleaners or polishes. Never use any fluids on the mechanical chime mechanism.

-2-	598-1112-01

121AC, 125C, 122C specifications

Heath Zenith has established a reputation for innovation and quality in the outdoor lighting and security market with its range of products designed to enhance safety and convenience around the home. Among their notable offerings are the Heath Zenith 122C, 125C, and 121AC, each boasting unique features and advanced technologies.

The Heath Zenith 122C is a motion-activated security light designed with both functionality and aesthetics in mind. This model features a powerful 180-degree motion sensor that detects movement up to 30 feet away. One of its standout technologies is the adjustable sensitivity feature, which allows users to customize the detection range according to their needs. Additionally, the 122C offers dual lights that provide excellent illumination for entryways, garages, and outdoor spaces, ensuring that any movement is clearly visible.

Similarly, the Heath Zenith 125C enhances outdoor security with a robust design and advanced features. This model is equipped with a 240-degree motion sensor, which provides a wider range of coverage compared to its counterpart. The 125C also includes a convenient test mode that makes it easy for users to adjust the positioning of the sensor and lights to achieve optimal performance. Users appreciate the weather-resistant casing that protects the light from environmental elements, ensuring durability and longevity.

The Heath Zenith 121AC light features a combination of innovation and ease of use. It stands out for its integrated dusk-to-dawn sensor, which automatically activates the light at sunset and turns it off at sunrise, providing hassle-free operation. This feature not only enhances convenience but also contributes to energy savings by ensuring the light is only on when needed. The 121AC is designed with LED technology, making it energy-efficient, providing bright illumination, and reducing maintenance costs due to the extended lifespan of LEDs.

All three models come with adjustable light timers that allow users to set how long the light stays on after being triggered. This ensures flexibility for various applications, whether for security purposes or general outdoor lighting. The Heath Zenith 122C, 125C, and 121AC lights exemplify the perfect blend of practical features and advanced technologies, making them excellent choices for homeowners looking to improve safety and illumination around their properties. With reliable performance and user-friendly features, these models reflect Heath Zenith's commitment to quality and innovation in outdoor lighting solutions.