10.Windows for Workgroups will now copy the appropriate drivers to the hard disk and modify the config.sys, autoexec.bat,system.ini and protocol.ini files.
11.When installation is complete, select OK and reboot.
Installation is now complete.
Windows 95
Hyptertec's Token Ring Software diskette contains files and is structured especially to support Windows 95 Plug & Play installation.
To install the Hypertec Token Ring adapter in Windows 95 operating system:
1.Turn OFF the computer and insert the Token Ring adapter card into the computer’s PCMCIA slot.
2.The Windows 95 software automatically detects the adapter and displays the New Hardware Found dialog box. If the software fails to detect the adapter, check that PCMCIA support is enabled in the Windows 95 system. Enable if necessary and reboot the computer.
3.Select the Driver from disk provided by hardware manufacturer option.
4.Type A:\WIN95 and select OK.
5.If a network has not yet been installed, the Windows 95 system will now install the Windows 95 network.
Installation is now complete.
Note: We recommend that you read the latest Microsoft information regarding PCMCIA. This information is provided with your Windows 95 operating system.