Hypertec BioDisk manual How to Swipe Finger Prints, How To Swipe Your Finger Print Step

Page 4

BioDisk from Hypertec - Quick User Guide

B.How to Swipe Finger Prints

B.How To Swipe Your Finger Print

Step 1

Place your Biodisk on a flat surface. Make sure the USB connector is facing to the left. (see picture)

Step 2

Make sure finger is clean and dry before swiping

Step 3

Place your finger on top and to right hand side of the sensor

Step 4

Press firmly down and swipe down across the sensor, keeping to the right hand edge. Take about 1-2 seconds to swipe your finger across the sensor.

Note: You may also rotate the BioDisk 180o and swipe. In this instance keep finger to left edge of sensor area. We would usually, however, recommend scanning as outlined above for better performance.

Image 4

Contents Hypertec BioDisk Quick User GuideTable of Contents General Description How to Swipe Finger Prints How To Swipe Your Finger Print StepSystem Requirements System RequirementsGetting Started D1. Registering Finger Prints StepD1. Registering Finger Prints ctd D1. Registering Finger Prints ctd Step D2. Setting Security Level and Password Step D2. Setting Security Level and Password ctd Step D3. Deleting Finger Prints and Passwords Step Finding the Serial Number Finding the Device Serial Number