Hypertec BioDisk manual D1. Registering Finger Prints ctd

Page 7

BioDisk from Hypertec - Quick User Guide

D. Getting Started

D1. Registering Finger Prints (ctd)

Step 3

The Finger Print set-up screen will come up automatically.

Select an un-registered finger from the screen, the finger will be highlighted in green.

Step 4

Once selected, you are asked to enrol a fingerprint. Press the finger firmly onto the sensor and swipe. Each swipe should last 1-2 seconds. Each finger print needs to be swiped successfully 3 consecutive times for enrolment to work. If successful, numbers 1,2,3 will show on the left hand side.

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Quick User Guide Hypertec BioDiskTable of Contents General Description How To Swipe Your Finger Print Step How to Swipe Finger PrintsSystem Requirements System RequirementsD1. Registering Finger Prints Step Getting StartedD1. Registering Finger Prints ctd D1. Registering Finger Prints ctd Step D2. Setting Security Level and Password Step D2. Setting Security Level and Password ctd Step D3. Deleting Finger Prints and Passwords Step Finding the Device Serial Number Finding the Serial Number
Top Page Image Contents