Hawking Technology Wireless-G Router manual Checking TCP/IP Settings Windows 98/ME, Using Dhcp

Advanced Administration

Checking TCP/IP Settings - Windows 98/ME:

1.Select Control Panel - Network . You should see a screen like the following:

2.Select the TCP/IP protocol for your network card.

3.Click on the Properties button. You should then see a screen like the following.

Ensure your TCP/IP settings are correct, as follows:

Using DHCP

To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows setting. Using this is recommended. By default, the Wireless Router will act as a DHCP Server.

Restart your PC to ensure it obtains an IP Address from the Wireless Router.

Using "Specify an IP Address"

If your PC is already configured, check with your network administrator before making the following changes:

∙On the Gateway tab, enter the Wireless Router's IP address in the New Gateway field and click Add, as shown below. Your LAN administrator can advise you of the IP Address they assigned to the Wireless Router.