4 Maintaining the WS320
Logging In to the Advanced Configuration Webpage
By default, most parameters are preset on the WS320 for supporting the network applications in general conditions. To view the working status or to change the parameters of the WS320, you can log in to the advanced configuration webpage.
You need to access the advanced configuration webpage through the wireless network of the WS320. To log in to the advanced configuration webpage, you can also do as follows:
When the WS320 Is Not Connected to the Wireless Router
Step 1 Set up a wireless connection between the PC and the WS320.
–When the WS320 is not connected to the wireless router: The SSID of the wireless network to be connected is Repeater.
–When the WS320 is connected to the wireless router: The SSID of the wireless network of your PC is the same as that of the wireless network of the wireless router.
Step 2 Set the network connection of the PC and ensure that the IP address of the PC is in the same network segment as the IP address of the WS320 local area network (LAN) interface.
By default, the IP address of the WS320 LAN interface is 192.168.1.254 and the subnet mask is 255.255.255.0. If the IP address of the LAN interface is not changed, you can set the IP address and subnet mask of the PC to 192.168.1.101 and 255.255.255.0 respectively.
When the WS320 is not connected to the wireless router, you can configure the network connection of the PC to obtain an IP address
25