Huawei WS320 manual Default Settings

Page 41

Default Settings

No.	Description

4Status indicator: located in the middle of the WPS button and used to indicate the working status of the WS320. For details about the status indicator, see the following table.

The following table describes the functions of the indicator.

	Color	Status	Description
	Red	Solid on	The WS320 is being started.

		Blinking	The WS320 is updating software.

	Yellow	Solid on	The WS320 has been started but not connected to a
			wireless router.

		Blinking	The WS320 is trying to set up a wireless connection
			with a wireless router.

	Green	Solid on	The WS320 has set up a wireless connection with a
			wireless router.

Default Settings

Parameter	Default Value
IP address of the LAN interface	192.168.1.254

35

Image 41

Contents User Guide WS320 Wireless RepeaterUser Guide WS320 Wireless RepeaterHuawei Industrial Base AddressBantian, Longgang ShenzhenTrademarks and Permissions Import and Export Regulations NO WARRANTYContents Basic Requirements 1 Warnings and PrecautionsEnvironmental Requirements for Using the Device Areas with Inflammables and Explosives Precautions for Using Wireless DevicesSafety of Children Disposal and Recycling Information MaintenanceEU Regulatory Conformance Reduction of Hazardous SubstancesPage Page Notice Observe the national local regulations in the location where the device is to be used. This device may be restricted for use in some or all member states of the European Union EU 1 Wireless router 2 Function Overview3 Setting Up a Wireless Connection To set up the wireless connection, do as follows Page B C A At this time, the indicator of the WS320 blinks in yellow, indicating that the WS320 is trying to connect to the wireless router through the WPS function. Wait for a moment generally about 20s and less than 120s. When the indicator of the WS320 turns solid green, it indicates that the WS320 successfully connects to the wireless router through the wireless network If the indicator turns solid yellow after blinking in yellow, it indicates that the WS320 fails to connect to the wireless network. For a solution, see 5 FAQs Page If your wireless router does not support the WPS function, you can manually connect the WS320 to the wireless router by using the Web-basedconfiguration utility Page B C A Step 3 In Room A, log in to the quick configuration webpage of the WS320 on the PC SSID AP SSID Repeater1.Click Manual Connecting If the indicator turns solid yellow after blinking in yellow, it indicates that the WS320 fails to connect to the wireless network. In this case, try to connect to the wireless network again on the quick configuration webpage SSID AP SSID APPage SSID AP Page 4 Maintaining the WS320 Logging In to the Advanced Configuration WebpageAdvanced Connecting to a New Wireless NetworkChanging the IP Address of the LAN Interface Restoring Default Settings 5FAQssometimes. In this case, what should I do? Step 1 Enable the wireless configuration service supported by Window XP 5.Click View Wireless Networks If several SSIDs are enabled on my wireless router, when the WS320 tries to connect to a wireless network by using the WPS function, which wireless network does the WS320 connect to? 6Appendix Hardware FeaturesDescription 2Power plug used to connect to a power socketDefault Settings Technical Specifications Page Preserve well. No reissue Warranty CardExclusions Limited WarrantySpecial Notice Postal Code Part Number Huawei Industrial Base Bantian, Longgang Shenzhen

Related manuals

Manual 49 pages 13.24 Kb