Step 3 Enable the WPS negotiation function of the wireless network adapter on your PC within two minutes, and then wait for a moment (typically 10s and at most 120s).
The WPS indicator of the HG523a becomes on from the blinking state, indicating that the HG523a is connected to your PC through the WLAN. This state lasts 300s. Then the WPS indicator turns off.
The WPS applications may vary with different types of wireless network adapters. For details about the configuration and operations of the WPS application, refer to the operation guide provided by the application provider.
4.2Setting Up a Wireless Connection Manually
If your network adapter does not support the WPS function, you can set up a wireless connection between your PC and the HG523a manually. To manually set up a wireless connection, use two of the following methods:
Use the tool provided by your network adapter. For details, see the user guide of your network adapter.
Use the wireless configuration software provided by the operating system of your PC. If your PC runs on Windows XP, you can use the wireless configuration software that is provided by Windows XP to set up a wireless connection between your PC and the router.
This section takes Windows XP as an example and describes how to set up a wireless connection between your PC and the HG523a manually, do as follows:
Step 1 Set the wireless network name and access password of the HG523a.
To set the wireless network name and the access password, do as follows (taking the authentication type
1.Log in to the
2.In the navigation tree on the left of the
3.Select the Enable WLAN check box.
4.Select the SSID1 from the SSID index
5.Enter a wireless network name in the SSID text box.
6.Select
7.Enter an access password in the WPA
8.Select TKIP+AES from the WPA encryption
9.Click Submit to save the settings.
Step 2 Enable the wireless configuration service provided by Windows XP.
8