Huawei HG630a manual Configuring a Dial-up Connection for Internet Access, Click Next

For security reasons or to make the password easy to remember,

you can change the user name and password for the web-based configuration utility. For details, see section 4.1 "Changing the User Name and Password for the Web-Based Configuration Utility".

If the user name and password have been changed, use the correct user name and password for login.

After the system verifies your account information, the web-based configuration utility is displayed.

2.2Configuring a Dial-up Connection for Internet Access

The HG630a works in routing mode by default. And the HG630a starts to set up a dial-up connection automatically after the startup. You can access the network after you power on your computer. You do not need to install any special dial-up software on your computer or perform dial-up operations on your computer.

To configure the HG630a and your computer for the network access, do as follows:

Step 1 Log in to the HG630a's web-based configuration utility. Step 2 Click Setup Wizard.

Step 3 Click Next.

Step 4 In User name and Password, enter the user name and password that are provided by your service provider, and then click Next.

Step 5 In SSID, set a wireless network name, and then click Next.

The default wireless network name and password which are printed

on the label of the HG630a's rear panel are preset before delivery. They are unique and safe. If you do not want to modify them, click Next.

For security reasons or to make the password easy to remember, you can change it. For details, see section 4.3 "Changing the Wireless Network Name and Password".

If the default wireless network name and password have been changed, user the new ones.

6