Huawei HG630a manual Restoring Default Settings, Configuring the Firewall

4.5Restoring Default Settings

If you restore the HG630a to its default settings, all customized user data will be lost. Use this function only when necessary.

To restore the HG630a to its default settings, power on the HG630a, press and hold the Reset button on the rear panel for over 6 seconds, and then release the button.

You can also do the following to restore the HG630a to its default settings from the web-based configuration utility:

Step 1 Log in to the HG630a's web-based configuration utility. Step 2 Choose Maintenance > Device to display the Reset tab.

Step 3 Click Restore Default Settings.

Step 4 In the displayed dialog box, click OK.

The login page will be displayed within 2 minutes. Enter the default user name (user) and password (HuaweiUser) to log in.

4.6Configuring the Firewall

The firewall can protect the terminal against malicious access on the WAN port and is used when the HG630a works in routing mode. To configure the firewall, do as follows:

Step 1 Log in to the HG630a's web-based configuration utility. Step 2 Choose Advanced > Firewall to display the firewall page. Step 3 Select a firewall level for Firewall level.

Step 4 Click Submit.

13