Huawei B686 manual Accessing the Internet, Setting Up a Wi-Fi Connection through the WPS

6.3Setting Up a Wi-Fi Connection through the WPS

If the client to which your router connects supports WPS, a network key is generated automatically.

To set up a WPS connection:

1.Ensure that is steady on.

2.Press and hold until blinks to activate the WPS connection on your router.

3.Activate the WPS connection on the client.

For details about the client's operations, see its user guide.

7 Accessing the Internet

After a connection between your router and the client is set up, you can access the Internet using the modes listed in the following table.

Select an appropriate mode according to your data service charging plan. For example, if you are charged according to the length of time you are connected to the Internet, it is recommended that you select manual mode. For details about your data service charging plan, contact your service provider.

Mode	Description
Auto	After being functioned on, the router will automatically
	connect to the Internet. Once connected, the router will
	not automatically disconnect from the Internet.
Manual	Log in to the web management page, and then
	connect to or disconnect from the Internet as
	prompted.
On	After being functioned on, if there is data being
Demand	transferred, the router will automatically connect to the
	Internet. If no data is transferred within a pre-defined
	period, the router will automatically disconnect from
	the Internet.

12