Hawking Technology HWUG1 manual

Page 13

6.Click the Access Control tab. Make sure that “Share-level access control” is selected. If connecting to a Netware server, share level can be set to “User-level access control.”

7. When finished, restart your computer to activate the new device.

8.Once the computer has been rebooted, a Logon window will appear and will require you to enter a username and password. Enter a username and password and click OK. Do not click the Cancel button, or you won’t be able to log onto the network.

-10 -

Image 13

Contents Page Trademarks & Copyright Contents Introduction FeaturesPackage Contents SpecificationsPeer-to-Peer Network also known as Ad-Hoc Mode Wireless Network Options / Quick TutorialInstallation Procedure Page Page Verify Device Installation Windows 98SE/ME Network ConnectionEnabling the File and Print Sharing Page Windows 2000/XP Page Page Accessing the Configuration Utility Configuration UtilitySite Survey Profile Ssid System ConfigurationAd-Hoc- Select this mode if you want to connect to another Authentication vs. Security Page Enable WPA in Windows XP Page Page Page Page Page Link Status Device for quality network operation Advanced StatisticsPage About Uninstallation Troubleshooting What is BSS ID？ What is Spread Spectrum？