Hawking Technology HWUG1 manual Network Connection, Windows 98SE/ME

Page 11

3 NETWORK CONNECTION

Once the driver has been installed, you will need to make adjustments to your network settings.

In Windows 98SE/ME

1.Go to Start Æ Settings Æ Control Panel Æ Network.

2.Make sure that you have all the following components installed.

Hawking HWUG1 Wireless-G Network Adapter with Removable Antenna

IPX/SPX-compatible Protocol

NetBEUI

TCP/IP

If any components are missing, click on the Add button to install them. All of the protocols and clients required (listed above) are provided by Microsoft.

3. Next, highlight the specific network component you need, click Add.

- 8 -

Image 11

Contents Page Trademarks & Copyright Contents Introduction FeaturesPackage Contents SpecificationsPeer-to-Peer Network also known as Ad-Hoc Mode Wireless Network Options / Quick TutorialInstallation Procedure Page Page Verify Device Installation Windows 98SE/ME Network ConnectionEnabling the File and Print Sharing Page Windows 2000/XP Page Page Accessing the Configuration Utility Configuration UtilitySite Survey Profile Ssid System ConfigurationAd-Hoc- Select this mode if you want to connect to another Authentication vs. Security Page Enable WPA in Windows XP Page Page Page Page Page Link Status Device for quality network operation Advanced StatisticsPage About Uninstallation Troubleshooting What is BSS ID？ What is Spread Spectrum？