Hawking Technology HWU54D manual

Page 27

Parameter	Description
Filter Type	Disable – Disable the MAC Address filter function.
	Accept – Only the wireless adapters with the MAC Address
	setup in the table can connect to the AP.
	Reject – The wireless adapters with the MAC Address setup
	in the table will be rejected to connect to the AP.
Filter MAC Address	MAC Address is a unique identification for hardware devices
	in the network. It is a 12-digit hexadecimal values.
	There are fifty sets of MAC Address can setup in the table. Fill
	the MAC Addresses of wireless adapters you want to accept
	or reject to access the AP in this table.

27

Image 27

Contents Page Limited Warranty FCC Caution Federal Communication Commission Interference StatementSafety TTE Compliance StatementEU Countries Intended for Use Contents Specifications FeaturesPackage Contents Installation Procedure Page Click Continue Anyway to finish the installation Page First Method Wireless Connection Status Configuration UtilityPage Bssid General Connection SettingSsid Page WEP and WPA Encryption WPA Setting Page Setting Advanced SettingWEP KEY Maximum Power-Saving Mode The adapter will enter Continuous Access Mode CAM The adapter will alwaysSoftware AP Mode AP successfully WEP RTS / CTS Page What is Ad-hoc？ What is the Ieee 802.11g standard?What is the Ieee 802.11b standard？ What does Ieee 802.11 feature support？What is TKIP? What is Infrastructure？What is BSS ID？ What is WEP？What is Spread Spectrum？