Hawking Technology PS12U manual Hardware Installation

Page 7

Hardware Installation

1.Connect the PS12U Print Server to a network.

2.Connect the PS12U Print Server to your printer(s).

3.Plug the AC power adapter into the power receptacle on the back side of the PS12U Print Server.

Check the LED’s marked as status on the side of the Print Server. It should flash up to five times normally. If not, please contact your local dealer for repair or replacement.

Image 7

Contents PS12U Vcci Mark Warning CE Mark WarningPage Package Contents What you will need to get started Link LEDs Green Status OrangeHardware Installation Page Page Page Page Page Netware Setup Manual Setup Pconsole Page Select Printer and Properties Add Printers to Windows 95/98/MePage PID 1 Parallel, PID 2 USB 1, PID 3 USB Lp1 Parallel Printer / lp2 USB 1 Printer/ lp3 USB 2 Printer Run Add Printer, Click Next Add Printers To Windows 2000/XPPage Configure Standard TCP/IP Port Monitor box as This step Page LPR Lp1 Parallel Printer / lp2 USB 1 Printer/ lp3 USB 2 Printer System Status Setup Wizard Re-type Password Printer Setup Page NetWare Setup Page Page Select NCF files options Select Edit AUTOEXEC.NCF file Installation ProcedureDetailed Pconsole commands Snmp Setup Link Up or Link Down Authentication FailureCold Start or Warm Start System.sysLocation Snmp.snmpEnableAuthenTrapsSystem.sysContact System.sysNamePage AppleTalk Setup BCP IPP Overview Page Lp1 Parallel Printer / lp2 USB 1 Printer/ lp3 USB 2 Printer Page Upgrading from your Browser Upgrade from PSAdmin Question a Question B Question C Question D Question F IPP EthernetPage Memo Page Memo Page Memo Page Memo