Hearth and Home Technologies WSK-MLT instruction

WSK-MLT MULTIFUNCTION WALL SWITCH

- INSTALLATION AND OPERATING INSTRUCTIONS -

Introduction

The WSK-MLT multifunctional wall switch is designed to control ﬂame height, blower speed, and auxiliary functions on your gas fireplace. For models equipped with the Intelliﬁre system (IPI), the cold climate function can control the pilot ﬂame as well. The wall switch is equipped with thermostat functions which can automatically control the temperature in the room in which it is installed. The wall switch interfaces with both intermittent and standing pilot systems. An auxiliary function provides 110-120 VAC source for added features the ﬁreplace may have installed. Electrical ratings for the control box are 110 VAC, 60 Hz, and is required for operation of this device.

Installation precautions

This remote is tested and safe when installed in accordance with this installation manual. It is your responsibility to read all instructions before starting installation and to follow these instructions carefully during installation. Do not install any components that may be damaged. Do not modify, disassemble, or substitute any of the components included with this kit. Installation of this unit must be done by a qualiﬁed service technician.

WALL SWITCH	CONTROL
WALL SWITCH	WIRE
FLAME
SOLENOID	COVER
	COVER
	PLATE
CONTROL
BOX
Figure 1.

1.0 Installation instructions

Placement of this wall switch may affect performance or accuracy of the automatic (thermostat) control. An assessment of the space should be done prior to installation for optimal performance. See the installation instructions section I for recommendations.

NOTE: The electrical junction box provided with the ﬁreplace must be wired with 110 VAC before installing this kit. See owners manual for details.

All wiring should be done by a qualiﬁed electrician and shall be in compliance with local codes and with the National Electric Code ANSI/NFGA No. 70- current (in the United States), or with the current CSA C22.1 CANADIAN ELECTRIC CODE (in Canada).

WARNING

Shock Hazard

Do not provide any power to this unit until all wiring is completed. Failure to do so may destroy parts of this device and render it unusable, and may lead to possible electrical shock.

Fire Hazard

Modification of any parts or installation of damaged components will void the warranty, and you may possibly cause a ﬁre hazard.

1.1 Determine location

Determine the location for the wall switch. The chosen location should provide an accessible location in the same space as the gas ﬁreplace. Never place this unit in a separate room. The control wire supplied with this switch is 33 ft (10M) in length. The distance from the ﬁreplace to the switch may be lengthened provided that the wire used never exceeds 50 ft, and that the distance from the ﬁreplace to the switch never exceeds 30 ft.

The switch should be mounted into a listed electrical junc- tion box. The junction box should be dedicated to this wall switch. Never install this wall switch into a junction box that is shared with other electrical service or devices. If possible, install this unit on an interior wall of the residence at a recommended height of 5 ft from the ﬂooring. Should the switch be installed on an exterior wall, be certain wall insulation is kept intact and not damaged or dislodged dur- ing the installation of the electrical junction box.

For exterior wall installations, it is recommended that the junction box be sealed with caulking material. This will minimize heat loss through this location and improve the accuracy of the automatic (thermostat) operation.

Hearth & Home Technologies Inc.

20802 Kensington Blvd., Lakeville, MN 55044

1	130-911G 12/07

WSK-MLT specifications

Hearth and Home Technologies has made significant strides in the home heating industry, and one of their standout products is the WSK-MLT, a multifaceted wood-burning stove that blends efficiency with elegance. Designed for modern homes, the WSK-MLT provides a sustainable heating solution while enhancing the aesthetic appeal of any living space.

One of the key features of the WSK-MLT is its advanced combustion technology. This stove utilizes a secondary combustion chamber that optimizes the burning process, resulting in reduced emissions and improved fuel efficiency. By maximizing the combustion of wood, the WSK-MLT not only ensures a more complete burn but also minimizes the amount of smoke produced. This makes it an environmentally friendly choice for homeowners.

Heat management is another standout characteristic of the WSK-MLT. With its efficient heat exchange system, this stove is capable of producing radiant heat that can warm large areas effectively. The adjustable air control allows users to fine-tune the burn rate, which translates to a longer burn time and a consistent heat output. The stove's large firebox can accommodate longer logs, enhancing its efficiency and reducing the frequency of reloading.

Aesthetics are equally important, and Hearth and Home Technologies have ensured the WSK-MLT does not compromise on style. The sleek design and customizable options, including various finishes and trims, make it a perfect fit for both contemporary and traditional interiors. The large glass door provides a captivating view of the fire, turning it into a focal point of the room.

Safety features have also been prioritized in the design of the WSK-MLT. The stove is equipped with a durable heat shield and cool-touch handles, making it safer for families with children and pets. Additionally, it complies with stringent safety standards, giving homeowners peace of mind.

In summary, the Hearth and Home Technologies WSK-MLT is a premium wood-burning stove that combines advanced technology, excellent heat management, stylish design, and robust safety features. Ideal for those seeking a reliable and efficient heating solution, it represents the perfect fusion of functionality and aesthetic appeal, promising to deliver warmth and comfort in the home for years to come.