Installing the control box | Hearth and Home Technologies WSK-MLT

1.3 Installing the control box

CAUTION

•Do NOT install the control box when ﬁreplace is hot.

•Do NOT plug control box in until all connections are complete.

1.Place control box into the base pan area of the ﬁreplace. Place unit as close to the louvers or decorative front as possible and to either the left or right side.

2.Connect the red, yellow or white, and green wires to the appropriate labeled terminals on the control box.

For units WITH factory installed rocker switch.

3.Find the red and brown pigtail wire (labeled “ FOR USE WITH REMOTE OR WALL SWITCH ONLY”) which are attached to the ﬁreplace ON/OFF rocker switch.

Standing Pilot Ignition: Connect these wires with the red and brown wires extending from control box (Fig 2).

Intelliﬁre (IPI): Connect these wires with the brown wires extending from the control box (see Figure 3).

For units WITHOUT factory installed rocker switch.

Standing Pilot Ignition:

Find these parts packed with WSK-MLT:

•Rocker switch

•Rocker switch bracket

•Strips of Velcro

•Black and white wire pigtails - (2)

•Female ends (only used on Standing Pilot applications) - (2)

Cut male ends off black wires on each pigtail. Strip each end of wire approximately 1/4 inch. Slide each stripped wire into a female end and crimp. Slide rocker switch into bracket until it snaps into place. Attach end of each pigtail to each side of rocker switch. Find the top (brown) and bottom (red) wires from the control box and attach to white wires from rocker switch. Attach one black wire to the TH/TP side of gas valve and the other to the TH side of the gas valve. Attach the Velcro to the bottom of the rocker switch bracket and mount in a convenient location next to gas valve. (Refer to Figure 4).

For units WITHOUT factory installed Rocker Switch

VALVE BLACK

Thermopile

WHITE

BLACK

SWITCH AND WIRE

ASSEMBLY SUPPLIED

WITH WSK-MLT

* May be labeled as “W” or “Y”.

		YELLOW
		WHITE
NOT	RED
USED	BLACK	G W* R
	BROWN
	BROWN
NOT	RED
USED	BLACK

RED

FLAME

SOLENOID

		ORANGE
FLAME HIGH/LOW		ORANGE
AC PLUG	BLACK

AUXBLACK

CONNECTION

GROUND PIGTAIL

GREEN

RED

REAR VIEW

GREEN

FRONT VIEW

YELLOW FACTORY

CONNECTED

YELLOW TOGETHER

FAN THERMOSTAT

FAN

BLACKCONNECTION

Figure 4. Standing Pilot Wiring Diagram

WSK-MLT specifications

Hearth and Home Technologies has made significant strides in the home heating industry, and one of their standout products is the WSK-MLT, a multifaceted wood-burning stove that blends efficiency with elegance. Designed for modern homes, the WSK-MLT provides a sustainable heating solution while enhancing the aesthetic appeal of any living space.

One of the key features of the WSK-MLT is its advanced combustion technology. This stove utilizes a secondary combustion chamber that optimizes the burning process, resulting in reduced emissions and improved fuel efficiency. By maximizing the combustion of wood, the WSK-MLT not only ensures a more complete burn but also minimizes the amount of smoke produced. This makes it an environmentally friendly choice for homeowners.

Heat management is another standout characteristic of the WSK-MLT. With its efficient heat exchange system, this stove is capable of producing radiant heat that can warm large areas effectively. The adjustable air control allows users to fine-tune the burn rate, which translates to a longer burn time and a consistent heat output. The stove's large firebox can accommodate longer logs, enhancing its efficiency and reducing the frequency of reloading.

Aesthetics are equally important, and Hearth and Home Technologies have ensured the WSK-MLT does not compromise on style. The sleek design and customizable options, including various finishes and trims, make it a perfect fit for both contemporary and traditional interiors. The large glass door provides a captivating view of the fire, turning it into a focal point of the room.

Safety features have also been prioritized in the design of the WSK-MLT. The stove is equipped with a durable heat shield and cool-touch handles, making it safer for families with children and pets. Additionally, it complies with stringent safety standards, giving homeowners peace of mind.

In summary, the Hearth and Home Technologies WSK-MLT is a premium wood-burning stove that combines advanced technology, excellent heat management, stylish design, and robust safety features. Ideal for those seeking a reliable and efficient heating solution, it represents the perfect fusion of functionality and aesthetic appeal, promising to deliver warmth and comfort in the home for years to come.