Installation, Function | HomeTech UMC instruction

Computer Interface Module	Model UMC

INSTALLATION

The Computer Interface Module is designed for indoor use.

1.Plug the Computer Interface Module into a 120-volt outlet near the computer or server (see illustration).

2.Connect the supplied interface cable to the socket on the bottom of the module. Connect the other end of this cable to the appropriate data port on the computer or controller.

3.If desired, any electrical device can be plugged into the socket on the front of the module, which is always powered.

FUNCTION

The Computer Interface Module, model UMC, is used to exchange digital commands between a PC (personal computer) or server/gateway and UPB (Universal Powerline Bus) devices in the home. The module communicates these commands over the AC power wiring. The following model is available:

UMC-DB9: Serial RS-232 interface, DB9 connector

UPB devices can be freely located anywhere in the home. No additional wiring is required and no radio frequency signals are used.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical products, basic safety precautions should always be followed, including the following:

1.READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

2.Keep away from water. If product comes into contact with water or other liquid, unplug immediately.

3.Never use products that have been dropped or damaged.

4.Do not use this product outdoors.

5.Do not use this product for other than its intended use.

6.To avoid risk of fire, burns, personal injury and electric shock, install this product out of reach of small children.

7.Do not cover the product with cloth, paper or any material when in use.

8.This product uses polarized plugs and sockets (one blade is wider than the other) as a feature to reduce the risk of electric shock. These plugs and sockets fit only one way. If they do not fit, contact a qualified technician. Do not use with an extension cord unless plugs can be fully inserted. Do not alter or replace plugs.

9.SAVE THESE INSTRUCTIONS.

OPERATION

The Computer Interface Module exchanges UPB messages between the powerline and the connected computer or controller. The indicator on the module will glow AMBER when powered and flash RED during messaging.

The interface has two operating modes: MESSAGE mode and PULSE mode. The last-used operational mode is retained during power interruption. UPStart software automatically sets the interface to PULSE mode operation, but most controllers require MESSAGE mode. To restore MESSAGE mode operation…

1.Place the UMC in SETUP mode by pressing the Program Switch (located just above the indicator) five times rapidly using a non-metallic toothpick. The indicator will continuously blink RED.

2.Reset to MESSAGE mode by pressing the Program Switch ten times. The indicator will continuously blink GREEN.

3.Press the Program Switch twice to exit SETUP mode.

CAUTION: Do not insert metal objects into the module while it is connected to power.

Simply Automated, Incorporated 5825 Avenida Encinas, Suite 101, Carlsbad, CA 92008 USA Technical Support: www.simply-automated.comor 800-630-9234452-0004-0001 Rev. A Revised: December 23, 2005

UMC specifications

HomeTech UMC is a leading-edge home automation system designed to simplify and enhance the way we interact with our home environments. With a focus on user-friendliness and advanced technology, HomeTech UMC caters to the needs of modern homeowners seeking convenience, security, and energy efficiency.

One of the main features of HomeTech UMC is its centralized control hub, which integrates various devices and systems within the home, allowing users to manage everything from lighting and climate control to security and multimedia systems through a single interface. The intuitive mobile app enables seamless remote access, ensuring that users can monitor and control their homes from anywhere in the world.

The system supports a wide range of smart devices, including smart thermostats, security cameras, smart locks, and smart lighting. This compatibility with a multitude of third-party products makes HomeTech UMC a versatile choice for homeowners looking to build a customized smart home ecosystem. The system can be easily expanded by adding new devices, making it scalable to suit the evolving needs of families over time.

HomeTech UMC utilizes state-of-the-art technologies such as IoT (Internet of Things) and AI (Artificial Intelligence) to provide a truly intelligent home experience. Through machine learning algorithms, the system can learn user preferences and habits, allowing it to make automated adjustments to optimize comfort and energy usage. For instance, the smart thermostat can analyze past data to adjust the temperature according to the time of day and occupancy, leading to significant energy savings.

Another key characteristic of HomeTech UMC is its robust security features. The system offers real-time monitoring and alerts for unusual activities, ensuring that homeowners can rest easy knowing their property is protected. With remote video access from security cameras and the ability to lock or unlock doors from anywhere, users can maintain peace of mind whether they are at home or away.

Additionally, HomeTech UMC emphasizes energy efficiency through smart energy management. By providing insights into energy consumption patterns, it empowers homeowners to make informed decisions about their energy use. This not only translates to cost savings on utility bills but also contributes to a sustainable lifestyle.

In essence, HomeTech UMC redefines home living by providing a sophisticated, user-friendly, and secure home automation platform. Its integration of advanced technologies and adaptability makes it an ideal choice for those looking to create a connected and efficient living space.

Computer Interface Module